*---== ST REPORT INTERNATIONAL ONLINE MAGAZINE ==---*
                  """""""""""""""""""""""""""""""""""""""
                  "The Original 16/32bit Online Magazine"





 November 15, 1991                                                  No.7.45
 ==========================================================================

                  STReport International Online Magazine 
                          Post Office Box   6672
                          Jacksonville,  Florida
                               32205 ~ 6672
  
                               R.F. Mariano
                            Publisher - Editor
                 -----------------------------------------
                   Voice: 904-783-3319  10 AM - 4 PM EST
                 BBS:  904-786-4176  USR/HST DUAL STANDARD
                    FAX: 904-783-3319 12 AM - 6 AM EST
                 -----------------------------------------
    STR East: FNET 350 - The Bounty ST BBS <Home of STR> 1-904-786-4176
           STR West: FNET 075 - Bloom County BBS 1-415-965-9347
       STR Canada: FNET 018 - ///Turbo Board Support 1-416-274-1225
         STR Europe: FNET 1031 - <<<INTERNET>>> 011-44-296-395-935
    __________________________________________________________________

 > 11/15/91: STReport  #7.45  The Original 16/32 bit Online Magazine!
   -------------------------
     - The Editor's Desk      - CPU REPORT        - IBM vs ATARI?
     - SST 030 UPDATES!       - CHERRY FONTS!     - SILHOUETTE 1.25
     - CODEHEAD NEWS!         - TRACKER ST REVIEW - STR Confidential

                    -* CHICAGO EXTRAVAGANZA UPDATE! *-
                       -* ATARI REPORTS A PROFIT! *-
                        -* 40MB FLOPPY ANNOUNCED *-

 ==========================================================================
                  ST REPORT INTERNATIONAL ONLINE MAGAZINE 
                     The _Number One_ Online Magazine
                              -* FEATURING *-
                     "UP-TO-DATE News and Information"
       Current Events, Original Articles, Hot Tips, and Information
             Hardware - Software - Corporate - R & D - Imports
 ==========================================================================
 STReport's  support  BBS,  NODE  350,  invites  BBS systems, worldwide, to
 participate in the Fido/F-Net Mail Network.  Or,  call Node  350 direct at
 904-786-4176, and  enjoy the excitement of exchanging information relative
 to the Atari ST computer arena through an excellent International  ST Mail
 Network.   All registered  F-NET - Crossnet SysOps are welcome to join the
 STReport Crossnet Conference.  The Crossnet Conference Code is #34813, and
 the "Lead Node" is # 350.  All systems are welcome and invited to actively
 participate.  Support Atari Computers;  Join Today!
 ==========================================================================
   AVAILABLE EXCLUSIVELY ON:  GENIE ~ CIS ~ DELPHI ~ BIX ~ FIDO ~ F-NET
 ==========================================================================




     COMPUSERVE WILL PRESENT $15.00 WORTH OF COMPLIMENTARY ONLINE TIME

                              to the Readers of;
  
                  ST REPORT INTERNATIONAL ONLINE MAGAZINE
                  """""""""""""""""""""""""""""""""""""""
                  "The Original 16/32bit Online Magazine"

                         NEW USERS; SIGN UP TODAY!

               CALL: 1-800-848-8199 .. Ask for operator 198

                 You will receive your complimentary time
                                   and 
                       be online in no time at all!

               WHAT'S NEW IN THE ATARI FORUMS (November 15)

 LIBRARY CHANGE

 Now that CompuServe's Forum Libraries support  "Across Library Searching",
 we have  closed down  our exclusive  "NEW UPLOADS"  Library. All new files
 will now be made available in whichever Library can best classify them.

 Use the powerful BRO LIB:ALL command  to browse  through all  of our Forum
 Libraries.   Files will  be displayed in reverse chronological order -from
 most recent to oldest.

 Download file NEWLIB.TXT from LIBRARY  1  of  ATARIARTS  or  ATARIPRO (now
 called "Forum Help/Info") for complete information on other new and power-
 ful Library commands.

 UPCOMING CONFERENCE!

 Please join us this coming  Thursday  (November  21)  for  a  VERY SPECIAL
 conference  with  Atari  software  publisher  DOUBLE  CLICK  SOFTWARE! The
 conference will begin at 10:00 p.m. Eastern Time  in Conference  Room 1 of
 the  Atari  Productivity  Forum  (GO  ATARIPRO).    DOUBLE  CLICK  will be
 discussing all of their software products, including DATA DIET.

 IMPORTANT NOTE:

 A FREE COPY of DOUBLE CLICK  SOFTWARE's DATA  DIET will  be given  away at
 this conference.   Don't  miss the opportunity to win - mark your calendar
 for Thursday, November 21, at 10:00 p.m. Eastern Time in ATARIPRO.

 EDHAK DISCOUNT FOR ATARI FORUM MEMBERS

 Download file EDHAKD.LZH from  LIBRARY 2  of the  Atari Productivity Forum
 (GO ATARIPRO)  for a  full demo of EdHak version 2.25. This version can be
 used with the soon-to-be-released QuickCIS version 1.70. Craig Harvey (the
 author of EdHak) has also announced a special discount for CompuServe mem-
 bers who which to  order the  full functioning  version. Contact  Craig at
 User ID number 73047,600 for details.

 ATARI ST MODEM-TO-MODEM GAMES

 The CompuServe  Modem-to-Modem Challenge Board (GO CHALLENGE) now supports
 the following two modem games by Forum member David Becker.  Both of these
 games are  available in  LIBRARY 2  ("Games") of  the Atari Arts Forum (GO
 ATARIARTS):

 Download these games, find  an opponent  through the  Challenge Board, and
 even  play  them  against  your  opponent  through  CompuServe  at reduced
 connect rates via the MTM Gaming Lobby (GO MTMLOBBY):

 PAIGOW.ARC 
 Las vegas style PaiGow poker. Play against the computer or  over the phone
 line with a friend! Monochrome freeware.

 BGAMMO.ARC
 Online backgammon  can be  played over the phone lines with a modem.  Many
 options including the ability  to play  the computer  make this  a fun and
 challenging monochrome game.  Freeware.

 LEXICOR TAKING ORDERS...

 LEXICOR announces  plans to  begin taking orders for its 24-Bit True Color
 video upgrade boards.  Read the file VIDBRD.TXT in Library  9, the Lexicor
 Software library  of the Atari Vendors Forum (GO ATARIVEN), for details on
 how to place an order and reserve a place on the waiting list.

 ATARI PORTFOLIO FORUM (GO APORTFOLIO)

 New calculators, lots of  graphic files,  and a  new launcher  program are
 some of  the latest  entries in our Portfolio Programming Marathon.  Check
 out the latest uploads by going into *any* library and typing BRO LIB:ALL.

 The programmers are requesting feedback on their efforts  -- good,  bad or
 otherwise.  Please help us encourage their mighty efforts!


                  THE ATARI PORTFOLIO FORUM ON COMPUSERVE
                            HAS BEEN DESIGNATED AN
                OFFICIAL SUPPORT SITE BY ATARI CORPORATION

            "GO APORTFOLIO TO ACCESS THE ATARI PORTFOLIO FORUM"


  ***********************************************************************





 > CPU STATUS REPORT               LATE BREAKING INDUSTRY-WIDE NEWS 
   =================
  
   Issue #45
  
   Compiled by: Lloyd E. Pulley, Sr.
  
   
  -- ATARI SHOWS PROFIT
  
 This week, Atari Corp. reported operating results for the third quarter 
 ending September 30, 1991 with sales of $49.2 million and an income of 
 $1.6 million compared to $89.1 million is sales and a loss of $3.9 
 million for the same quarter in 1990.
  
 During the third quarter of 1990, the company repurchased a portion of 
 its 5 1/4% subordinated debentures which resulted in an extraordinary 
 credit of $6.9 million. As a result of the extraordinary credit, net 
 income for 1990 was $3.0 million as compared to net income for 1991 of 
 $1.6 million.
  
 The company believes that sales have stabilized at this new level. In 
 addition, the company has restructured its overhead to be in line at 
 this level of operations.
  
 Atari Corp. manufactures and markets video games and personal computers 
 for the home, office and educational marketplaces throughout the world. 
 Atari headquarters are located at 1196 Borregas Ave., Sunnyvale, Calif. 
 94089.
  
  
  -- Demand Too High for Apple's New Notebook Computers
  
 Demand for Apple Computer Inc.'s new notebook portable computers is so 
 high the company is unable to keep up with consumer demand. The business 
 community is expressing a strong interest in the new notebook computers.
  
 According to a source at Apple, Apple is not suffering production prob-
 lems, and they expect the supply problem to ease soon.
  
 The PowerBook line, officially unveiled just a few weeks ago at the Las
 Vegas Comdex computer show, are small and lightweight enough to fit in a
 briefcase.  They range in price from $2,299 to $4,599.
  
  
  -- Japanese Software Firms in Decline
  
 Japan's software industry, which has posted annual growth of nearly 30% 
 over the past years, is facing a slew of bankruptcies.  According to the 
 Jiji Japanese press service, 37 software firms became insolvent in the 
 first 6 months of this fiscal year to September compared to a total of 
 33 bankruptcies in all of fiscal 1990.
  
 The wire service reported officials with Japan's Ministry of Interna-
 tional Trade and Industry predict "the spiralling number of software 
 bankruptcies will set off an industry-wide shakeout."
  
  
  -- Microsoft and Digital Plan Pact
  
 Microsoft Corp. and Digital Equipment Corp. will announce next week a 
 new alliance that analysts say will escalate the feuding among com-
 panies atop the computer industry.  The announcement is expected to 
 combine Microsoft's strength in developing software for desktop com-
 puters with Digital's expertise in linking computers in global networks.  
 Beyond the technology, observers say the move stands to widen the rift 
 between Microsoft and IBM while allowing Microsoft makes friends with a 
 large computer maker.
  
  
  -- NEC to Market Notebook in US 
  
 NEC Technologies Inc. says it has started selling a $2,555 32-bit note-
 book-size personal computer in its 9800 series in the US.  The Foxbo-
 rough, Mass., subsidiary of Japan's NEC Corp. earlier put 9800-series 
 desktop PCs on sale in the US, but this is the first notebook NEC has 
 marketed here.
  
 NEC says the system can run about 8,200 kinds of software currently in 
 use for NEC's 9800-series PCs in Japan.
  
   
  -- Supercomputer Shrinks
  
 Wavetracer Inc., a small computer maker, will introduce what it calls 
 the first supercomputer small enough to sit beside a desk.  The machine 
 packs up to 8,192 microprocessors and will cost as little as $85,000, 
 compared with the millions of dollars most supercomputers sell for.
  
  
  -- NEC Wants to Use Sun's Unix-Standard O/S
  
 Japan's NEC Corp. wants to use Sun Microsystems Inc.'s Unix-standard 
 operating system on its PC-9800 laptop personal computers, according to 
 a NEC spokesman.  The spokesman noted that Sun suggested its use to NEC 
 last month. NEC is expected to start using the system software, which is 
 still under development, in 1992.  NEC's PC-9800 is the most popular PC 
 in Japan.
  
  
  -- Toshiba Develops 40 Megabyte Floppy Disk
  
 Toshiba has developed a 3.5-inch 40 meg floppy disk and the disk drive, 
 and the firm is preparing to market them within two years.
  
 Toshiba has developed this 3.5-inch 40 meg floppy disk by applying a 
 special magnetic material called "super barium ferrite." With this 
 magnetic material, the density of data recording has been increased a 
 great deal.
  
 Toshiba has also developed the floppy disk drive for the floppy disk. 
 The firm has applied an interesting technology called "backward metal in 
 gap" (BMIG). Using this technology, the magnetic head rotates against 
 the disk and it creates a symmetrical signal. As a result, the recording 
 density increases, claims a company spokesman.
  
 According to the company, this 3.5-inch 40 MB floppy disk is compatible 
 with current 4 MB floppy disks.
  
 Toshiba hopes to make this 3.5-inch floppy disk and the drive an indus-
 try standard. It is expected that the firm will get ready for quantity 
 production of the products by the year 1993.
  
  
  -- Western Software Firms Battle Piracy in Eastern Europe
  
 In an attempt to battle the East European software pirates, Western 
 software manufacturers are selling their products at rock-bottom prices 
 in the former Eastern Bloc nations.  1-2-3, the popular spreadsheet from 
 Lotus Development Corp., sells for the ruble equivalent of $50 in the 
 Soviet Union, compared to the $300 it costs in the United States.
  
  
  --Sierra On-Line Entering Educational Market
  
 Sierra On-line is entering the educational software market, investing 
 more than $1 million in its first three educational software titles that 
 are fun enough to steal children away from television, the company 
 claims.  The three new titles are expected to be available before the 
 holiday season this year.
  
 Mixed-Up Fairy Tales, a sequel to Mixed-Up Mother Goose with a suggested 
 retail price has been set at $49.95.
  
 Ecoquest 1: The Search for Cetus -- This game is an environmental lear-
 ning game that takes place completely underwater with a suggested retail 
 price is $59.95.
  
 Castle of Dr. Brain -- Analytical and problem-solving skills are the 
 focus of this game with a suggested retail price is $49.95.
  



  """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

                             IMPORTANT NOTICE!
                             =================

 As a reader of STReport International Online Magazine, you are entitled to
 take advantage of a special DELPHI membership offer.  For only $29.95 ($20
 off the standard membership price!), you will receive a lifetime subscrip-
 tion to DELPHI, a copy of the 500-page DELPHI: THE OFFICIAL GUIDE and over
 $14 worth of free time.  

  NOTE: Special offers can be found in your favorite Atari magazines:

              START             CURRENT NOTES         ST INFORMER
                          ATARI INTERFACE MAGAZINE
  
                          SIGNING UP WITH DELPHI
                          ======================
       Using a personal computer and modem, members worldwide access
                  DELPHI services via a local phone call

                              JOIN -- DELPHI
                              --------------
     1. Dial  617-576-0862 with  any terminal or PC and modem (at 2400 bps,
        dial 576-2981).
     2. At the Username prompt, type JOINDELPHI.
     3. At the Password prompt enter STREPORT.

 For more information call:
                 DELPHI Member Services at 1-800-544-4005
                                    or
    at 617-491-3393 from within Massachusetts or from outside the U.S.

 DELPHI is a service of General Videotex Corporation of Cambridge, Mass.


                           SPECIAL ANNOUNCEMENT
                           --------------------

 The 20/20 Advantage Plan IS FANTASTIC!   And  it features  20 hours online
 for just  $20 a month!  The $20 is a monthly fee that covers your first 20
 hours online via direct dial into one of DELPHI's two direct-access lines,
 or via  a special  Tymnet 20/20  Access code.  It also gets you additional
 hours at just $1.20 per hour.  And you get free access to several services
 on DELPHI as part of the Advantage Perks.

 Other telecom services may have additional charges.  Canadian Tymnet users
 have an additional telecom charge.  Office Time access (7 a.m. to  7 p.m.,
 weekdays) may  have an  additional charge.   And of course, other restric-
 tions may apply.  But this is still an amazing deal!


                              IMPORTANT NOTICE!
                              =================

 As a reader of STReport International Online Magazine, you are entitled to
 take advantage of a special DELPHI membership offer. DELPHI has waived the
 sign-up fee!   For a limited time, you can join the World's Premier Online
 Service for FREE!  Members can access DELPHI worldwide through hundreds of
 local access lines.


 For more information please contact:

           DELPHI at 1-800-544-4005 and ask for Member Services.

                 DELPHI- It's getting better all the time!



  """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""




 > GREENER PASTURES? STR FOCUS      "ATARI HARDWARE IS RIGHT UP THERE!"
   ===========================




                         WAKE-UP, SMELL THE COFFEE
                        THE TOAST IS ALREADY BURNED

                       ATARI, IBM, & THE REAL WORLD



 ctsy DELPHI LIBRARY


 In the age of the new 68030 Atari TT and Mega STE, and the coming SST
 68030 turbo upgrades from Gadgets by Small for various Atari's, it's easy
 to overlook the revolutionary aspects of the ST, which is only now begin-
 ning to be emulated in the IBM world.

 Giving credit where it's due, here's a quick overview of the latest,
 greatest IBM world from the standpoint of a "yesterday's" technology, my
 old ST.

 The Mega 4 on which I'm typing is placed barely a foot away from an IBM
 386, 33 MHZ, with 64K cache and 4 megs of RAM.  This DOS machine was
 recently purchased by my friend, who is an Atari and Amiga user as well,
 for the purpose of video game development and testing.

 Which brings up the first issue:

 Atari, the GAMES machine?

 One of the first criticisms of Atari, and the stigma that has kept it from
 blossoming in the public's eye (aside from Atari Corporation's apparent
 fear of the U.S.  market), is that Atari is first and foremost, a games
 machine.

 The Fact:

 My friend is a devoted player and more recently, developer of computer
 games.  New to this arena (signed his contract with a computer games
 publisher in August, 1991), he tells me of what he has learned in resear-
 ching the computer games market:

 If you are a developer of computer game software, you'll be wise to
 develop it first for IBM, well noted to have the largest base of computer
 GAMES machines and players in the world.  Period.  More than a ten to one
 margin.

 "Ah!" you'll say, "There is no comparison! A ten to one margin over Atari
 in the U.S.  would only total only a small fraction of the total IBM user
 base in this country!"

 Not quite...

 The fact of the matter is that the bulk of the IBM user base consists of
 antiquated machines that cannot do justice to the advanced games (such as
 the ones continually being played at my side).  No way...

 Games playing (of this complex, new software) requires at least a 386 com-
 puter, like the one mentioned above, with expensive sound boards and the
 like to be tolerable in terms of playability.  That is, of course, if
 anything above two color vector "stick figure" graphics is what you want
 on your Super VGA monitor.

 So, the question is raised;
  "How many high-speed 386's are out there?  486's?"

 "A LOT more than there are ST's!" you'll scream.

 Okay.

 What difference does a fast 386 make in word processing, still one of the
 primary uses of computers? Take the drive-intensive programs like Word
 Perfect.  The difference a 386 makes in many such programs is
 insignificant, even meaningless next to the average speed of the end user. 
 No sum gain.

 Now, what difference does a high speed 80386 and math coprocessor make in
 number crunching? Throw in the works, high power machine, coprocessor,
 etc.  and a highly complex spreadsheet on an IBM.

 The job:

 Create from scratch a spreadsheet 985K in file size with more than 1000
 calculation cells with the average calculation requiring, say, 75 charac-
 ters to define with at least 4 data cells called upon for manipulation and
 5 levels of parentheses.

 Throw the same complexity at an Atari running, say, LDW Power.

 "Oh, but you can't! LDW doesn't compare to Lotus Release X..."

 Ah, but it does.  Look at the facts:

 POINT 1: The average IBM Lotus user accesses only a fraction of the
 program's power.  Average user for average user, the spreadsheets will al-
 most certainly sport the same complexity and use of functions (most over-
 lap anyway: that's why files from an Atari work on the IBM and vice ver-
 sa).

 POINT 2: Make the computers STOCK, with no routines whatsoever to call
 upon 'extended memory.' In this case, only the Atari can do the work in
 the first place, because the IBM is lost in the quagmire of the DOS 640K
 limit!

 On to the job--

 O.K., it's 9 a.m., and the work has got to be turned in fast! In a toe--
 to-toe free-for-all, under this comparison, both users (IBM and Atari)
 will go to lunch at the same time, despite the Atari user's lack of math
 coprocessor.

 The painful truth:

 The 'mammoth' speed difference might amount to a 1000% comparative
 increase in recalculation speed on the IBM over the Atari, but recalcula-
 tion speed only accounts for, perhaps, 2% or less of the time of a spread-
 sheet session.  Even in a very complex spreadsheet, the 'miserable' Atari
 is going to do the recalculation in a few seconds.  The IBM may do the
 same job in a quarter second, but this falls under the heading "so what?" 
 The time-intensive activities in MOST computer work amounts to THINKING
 time, DATA ENTRY time, and, of course, relative TYPING SPEED.

 I wouldn't have dreamt of whipping this discussion up were it not for the
 fact that I'm an ace-typist.  Fast and few mistakes.

 And for this reason, I'd make a bet with anyone any day that a wicked fast
 typist with a strong working knowledge of a given program will always make
 mincemeat out of anyone - regardless of machine make or speed.

 What about that 985K spreadsheet file? 

 I've got several...  and any IBM user would tell you, many programs just
 don't access memory past 640K...  and after loading the program, how much
 overhead is left to load a file? Now, are you going to compare IBM hard
 drive caching or paging to ST RAM?

 Remember, no matter how big and expensive and fast the IBM, it is, in the
 end, a 640K machine that needs significant coaxing to go beyond 640K, and
 even that does not ALWAYS guarantee the user access past the 640K barrier!

 Now, try to think of a way, aside from making HUGE ramdisks or something,
 to PREVENT and Atari, like a Mega 4, from accessing every bit of RAM up to
 the full computer memory...

 Asking the wizard of a programmer working with my friend on his game about
 the 640K barrier, he merely replies, "the new DOS helps a bit."

 "A bit."  (And enough beating of the dead horse!)

 A Heartwarming Tale:

 A member of my family has worked at Abbott Laboratories (always in the top
 half of the Fortune 500) for over 20 years.  This company routinely spends
 millions of dollars on every sort of computer imaginable, from mainframes
 to Macs to IBM 386 portables (and then some).  The stories they tell about
 IBM woes (try using Windows 3 on a network, chuckle-chuckle!) never fail
 to warm my heart, restore my faith in my 'ugly duckling' Atari, and keep
 the grin on my face.

 Admissions:

 I work principally in monochrome.  But I do like the Super VGA color and
 quality on the IBM (clone) screen not even arm's length from my keyboard. 
 The color in those games can be breathtaking.

 But the DOS prompt and silly blinking cursor (Do you know the names of the
 six directories you're about to laboriously type out trying to access that
 deeply buried file? How's your typing accuracy?  Is it one or two
 backslashes? And when you realize it's on E: rather than C:?)

 Yes, you can access the DOS shell, but on a stock system, you are going to
 be fudging around, regardless of your skill.  

 And face it, DOS is ugly, and even with the shell, too close to the com-
 mand line to call it 'user friendly.'

 So you add the high power stuff.  You get Windows 3.

 Okay! A graphic interface! It boots up and that VERY PROFESSIONAL, BEAUTI-
 FULLY EXECUTED Windows desktop comes up! 

 I do like the 'pretty' interface of Windows 3.  All the applications have
 a nice look, in terms of buttons and window borders.  But is it intuitive?
 Not by a huge stretch of the imagination.

 So you add THE NORTON DESKTOP!!!!

 With the 33MHZ 386 IBM at my side, booting all the way to the Norton
 Desktop for Windows takes 59 seconds (it's actually closer to 60, but
 let's be forgiving).

 My Mega, with TOS 1.4, booting off a Megafile 44 Syquest drive (notably
 slower than the IBM internal hard disk), and loading DC Shower with its
 ARC, LZH, ZIP, and ZOO viewer/extractors, plus its PIC and TXT viewers,
 plus loading DCLITOFF, DC_BHELP, FPPRNT, LGSELECT, my TOS patches, plus
 loading the accessories CARDFILE, DCPICK, MAXIFILE, STENO, AND TURBOMONO,
 PLUS autoloading NEODESK 3, boots in 24 seconds flat (actually 28.92
 seconds).

 That's a 35 second savings, enough to say that all that speed in the
 cached 386 will never catch up in an average day.  Not unless the machine
 is turned on to do something like high grade fractal generation or 16 mil-
 lion color renderings...

 No, for the average user, doing average things, the ST would save time
 over the IBM.

 Especially if the user needs to quickly check and decompress a ZIP'd file
 or preview a few text files or pictures from the desktop or inside any
 program.

 Talking common turkey, the Norton Desktop is very much like the Neodesk
 environment, only that Norton is MEGABYTES in size versus Neodesk's paltry
 140K.

 And try as you will, on the spur of the moment, you're not gonna type a
 note on the Norton Desktop.  What's a desktop for, anyway? Just ask
 Neodesk.

 In using Windows and the Norton desktop, you get the feeling that a whole
 lot of people obsessed themselves with trying to find a way to make some-
 thing very primitive and oppressive into something user friendly.  The key
 word is TRYING.

        Somewhere along the line they missed getting a KISS across:

             (  K_eep   I_t   S_imple,  S_tupid!  )

 Windows, for sure, needs a BIG manual, and MUCH getting used to, if not
 TRAINING on the outside.  (Ever NOT seen Windows classes?)

 The Norton Desktop is relatively pleasurable by comparison, and somewhat
 obvious to an Atari user, but the obtuse and somewhat confused array of
 buttons and controls in the windowed environment (shared by Windows and
 Norton alike) has much (SPEED!!!!!!!!) to be desired! Click to close, and
 worry about the multiple ("I just want the window CLOSED, thank you!!")
 options presented.

 Again, for the average user...

 Just count the mouse clicks (oh, you mean the mouse that came in the
 original box with the computer, or that add-on option needing a software
 driver because it is alien to your system?).  

 The 386 at my side has only one mouse, but so far has gone through two
 mouse drivers, and in no uncertain terms, the mouse is still KLUNKY!
 Unsmooth, and with TWO mostly unused buttons out of three.  It is a con-
 tinual grin to watch the poor mouse support being reflected in various
 game designs, which, although laden with on screen selector buttons, some-
 times (often) loses the mouse pointer ENTIRELY.

 To this clone, and, I suspect, many IBM's like it, mousing around is not a
 fun business.

 Still, now you've spent your big bucks, have that nifty IBM running, got
 Windows up.  Let's run that software...

 WHAT DO YOU MEAN I NEED THE WINDOWS VERSION????!!!!!

 Don't fret, a reasonable publisher will upgrade your old software for a
 small fee, and a week or so later....

 THE CHALLENGE:

 Windows 3 is the be-all, end-all of graphic interfaces, right? If so, take
 a computer neophyte and teach him how to use it in five minutes.  You
 won't be able to do it even with an experienced computer user.  That's why
 the manual is HUNDREDS of pages, and still cryptic to the average user.

 Now, do the same thing, but teach Neodesk to someone.  Five minutes should
 just about do it...  at least enough to make most functions intuitive.

                          THE JOKE OF IT ALL...

 In the Atari world, we have Neodesk, Maxifile, Steno, D.C.  Shower,
 Cardfile.  If an IBM'er only knew...

 ...that a desk accessory didn't necessarily have to load off a hard 
    drive, delaying its availability.

 ...that nearly any graphics file can be viewed within any application 
    prior to its selection and/or use in the program.

 ...that 'extended memory' is not the software-patched exception, but 
    the high-headroom norm...  

 ...that he could decompress any .ARC, .LZH, or .ZIP file from within 
    ANY program for use IN the program or otherwise...

 ...that a path name would almost NEVER have to be typed...

 ...that notes can be typed directly on the desktop.  No need to load 
    up a memo page.  Unless you want to.  This document is an ST Memo 
    Page from Steno...

 ...that any disk drive can be opened, viewed, and files manipulated 
    in EVERY way, instantly on the desktop itself or from within any 
    program.

 ...that all programs written for his computer took advantage of a 
    windowed environment for the last six years.

 ...that if his floppy disks burned, and hard drive smoked, that his 
    computer will still boot as a full-function window-based computer.

 ...that his programs, oft-used folders and files could be right 
    there, on the desktop awaiting his use, no matter how far they were 
    buried in directories.

 ...that, a good friend could teach him the ins and outs of his 
    windowed environment within five minutes, and that computer class 
    and wading knee deep in manuals would never be necessary...

 ...that the sophistication he can enjoy is matched by a truly user 
    friendly system.

 ...that any file could be found, no matter where it was, in seconds,
    from within any program or the desktop.


                          A Last, Little Note
                  And a Smattering of Understatement
                  ----------------------------------

 It's a wonder how anything can get done using such an antiquated computer
 system like the Atari.  I've just finished my second month three thousand
 miles from my home finishing up some feature films for our production /
 distribution company called Mutual General Pictures.  We've only been
 around for 25 years, so we don't really know what we're doing.

 On my pathetic, lowly ST, I seem to remember screen writing (and having to
 'do' lunch with actor-types), budgeting (to the penny), doing title lists,
 desktop publish the titles for use in actually movies themselves,
 organizing the various shoots, making demo cassette labels -- whatever it
 took to make it happen in what amounts to a paperless office.

 When I do print, I often print in PostScript, but I do not need a
 PostScript printer (too big and too delicate to tote mine cross-country). 
 Instead, I use a portable Canon Bubblejet, even when printing EPS files
 and real Type 1 (not Ultrascript) fonts without bitmaps.  That's because I
 use PageStream, not PageMaker (ALONE, without strap on programs like AT-
 M)...

 At our Beverly Hills office, the boss put in a 486 superduper IBM multi-
 user system.  THEY got the BIG, office model Canon Bubblejet.  Yet, with
 all their users and terminals and "high-end" software, they can not begin
 to match the ST and PageStream.  Not on a Bubblejet.  Not without spending
 EXTRA money on software to print with the same fonts (EXACTLY) that I use
 in PageStream.

 Sometimes, another party gives me IBM disks with things I need, so I tell
 them to bring it on a 2DD.  Then I use them.  Including full color/full
 gray scale images, etc.
  
 I keep track of all our crew members, production equipment and prop sour-
 ces in an electronic rollodex that also dials without the need to touch
 the phone 'till the party answers.

 I'm used to 100% WYSIWYG, and like it that way.

 My spreadsheets approach 1 meg with over 2500 calculation fields.  Many of
 the formulae are 40-90 characters across with 5 or more levels of nested
 parentheses.  Gosh, I can take one luxurious sip of Diet Pepsi waiting for
 that recalculation to occur.  Two, if I'm fidgety...

 And on the bottom line, currently, our company has five features being
 readied for delivery to the world market.  Granted, they are mainly low
 budget action films for foreign distribution -- but in low budget, one
 person must 'wear' many 'hats.'

                         If only my Atari could keep up.

                                        Almost forgot.  It did...


     AND WE'VE BEEN COMPARING THE LATEST IBM OFFERINGS WITH VERY EARLY, '6 
     YEARS OUTMODED' ST TECHNOLOGY!

          It's almost to say, if it ain't broke, don't fix it...

               See you at the Festivals! (Film Festivals, that is...)








  ***********************************************************************


                    :HOW TO GET YOUR OWN GENIE ACCOUNT:
                     _________________________________

                       To sign up for GEnie service:

      Set your communications software to Half Duplex (or Local Echo)
                     Call: (with modem) 800-638-8369.
               Upon connection type HHH (RETURN after that).
                         Wait for the U#= prompt.

                 Type: XTX99587,CPUREPT then, hit RETURN.


 GEnie costs only $4.95 a month for unlimited evening and weekend access to
 more  than  100  services  including electronic mail, online encyclopedia,
 shopping, news, entertainment, single-player games, and bulletin boards on
 leisure and  professional subjects.   With  many other services, including
 the biggest collection of files to download and the best online games, for
 only $6 per hour.

 MONEY BACK  GUARANTEE!   Any time during your first month of membership if
 you are not completely satisfied, just ask for your $4.95 back.

        GEnie Announcements (FREE)       

  1. NEW FCC COST INCREASE THREATENS COMPUTER SERVICES...........*FCC
  2. October Billing Complete -- Type *BILL for details..........*BILL
  3. Admiral, a new Windows PC program for Stellar Emperor.......EMPEROR
  4. Meet Steve Hudgik of HomeCraft Software. FREE RTC in........TANDY
  5. HOT IIgs System 6.0 Programming RTC in ---->................A2PRO
  6. Wetmore talks about GEnie BB's..............................STALADDIN
  7. Win FREE connect time before time runs out..................COLLEGE
  8. The adult space fantasy is now twice as big.................FED
  9. What's up tonight in your favorite Computing RT.............COMPUTING
 10. How Much is That Thingy - Unique Holiday Gifts..............GENIEMALL
 11. HAYES BB free for November's CompuCopia.....................HAYES
 12. Who joins High IQ societies and why. Find out in............*PF
 13. Meet Ken & Roberta Williams during COMPUTE's Sierra Week....COMPUTE
 14. Technical Support from Quarterdeck..........................IBMPC
 15. Visit the GEnie Info Library today..........................*LIBRARY

 Atari ST RT

     From The Program of the Week  to the  only Atari  realtime compression
 program Data Diet, Double Click Software has been providing the Atari com-
 munity with the products they demand.  Please  join Double  Click Software
 for a  GEnie realtime  conference on  November 20, 1991 (10 PM EASTERN) as
 they celebrate the beginning of their sixth year  of supporting  the Atari
 userbase.   Double Click Software will be giving away at least one copy of
 Data Diet to some lucky person during their conference!

 Soft-Logik RT

     SOFT-LOGIK will have a freebie night this TUESDAY  from 6pm  'till 6am
 in the  BB areas.   Also, there will be a free Online Conference from 10pm
 EST till 11pm EST  in the  conferencing area.   Type  M-385 to  get to the
 Soft-Logik RoundTable.  "A great place for all DTP enthusiasts."


         GEnie Information copyright (C) 1991 by General Electric
            Information Services/GEnie, reprinted by permission


  ***********************************************************************






 > The Flip Side STR Feature        "... a different viewpoint..."
   =========================




                    A LITTLE OF THIS, A LITTLE OF THAT
                    ==================================


 by Michael Lee


 I've devoted this weeks' issue to one person and topic -- Dave Small 
 (Gadgets by Small) and his new SST (68030 accelerator) and his MegaTalk 
 board.  He recently visited CompuServe (CIS) and answered many ques-
 tions about himself, the SST and the MegaTalk board.  I've included the 
 whole series of his replies even though some of the information was 
 duplicated because, well, because I find Dave's writing entertaining and 
 I hope you will too.
  
                             ----------------

 Misc. posts by Dave Small from CIS...
    I would like to go on record, and anyone who wants to can quote me.
  
    The first PRODUCTION - e.g., real, live, going-to-customers - Mega-
    Talks were picked up by Sandy, Jamie, and I (Jamie is our 3 year old) 
    on Nov. 8, Friday.  We are now in the process of hauling you-know-
    what to get them put in the right boxes with manuals and software 
    disks and shipped.
  
         *** The Wait Is Over ***
  
    As for SST, I wish the news was so concrete. Raving Idiot Chip Supply 
    flat gave us *hundreds of defective chips* -- then told us at the 
    last second. I made it a personal goal to ship SST's THIS WEEK (Nov. 
    12 - Nov. 11, Monday, is Veteran's Day). Frankly, people, if I have 
    to wade into a parts place with a bunch of $20 bills from an Anytime 
    Machine and get working chips, I will do it. I am SICK of not 
    shipping SST's and having extremely totally awesomely dubious things 
    said about it.  I would like you to e-mail me Friday, November 15, 
    and see if I haven't shipped some. I will answer all emails.
  
         *** The Wait Is Over ***
  
    I *SAID* online,for the record, that SST was one foot and three toes 
    out the door.  It is.  I'm damned if I'm going to let Raving Idiot 
    stop me now.
  
                              ----------------
     
    It is my personal goal to ship SST this week and this means a great 
    deal to me. I have been saddled with a bunch of penny-ante defective 
    chips by the idiots at a part company, but it is a COMMON part and I 
    can (and will) find it elsewhere.
  
    Let me repeat: I am determined to ship SST this week, November 12 
    (after the holiday / Veterans Day). I don't think Sandy likes the 
    glint in my eyes at all.
  
                              ----------------
     
    I would literally be putting boards into boxes and making mailing 
    labels with the LabelWriter (tm) NOW if we had not gotten a boatload 
    of defective chips. (Not to worry, they are cheap ones, not 030's!).
  
    I am dead serious about plunking down cash, retail, and buying out 
    every mail order place and Denver "Silicon Mountain" (*chuckle*) 
    place I can find. 'cause once I get these chips, in they go, we test, 
    we put into package, we ship.
  
    It was my personal goal, in red letters on my dry-ink board, quote, 
    SHIP SST'S THIS WEEK!, unquote. In the hardware business it is always 
    hard, and you know your sales reps real good.
  
    Like the badge says, NO MORE REAL-SOON-NOW! I totally agree.
  
    Fundamentally, notes about how someone else's outfit screwed up DO 
    NOT MATTER; there are people out there trusting me, personally, with 
    their ause I delivered with Spectre 128 and Spectre GCR and they feel 
    the SST design is right for them.
  
    I fully expected, with good reason, to ship in September. It would 
    give the competition *major* trade secrets to detail why we have not; 
    it was really, really, really hair. Even Minoxodil can't keep my hair 
    in when I pull it out that hard.
  
    I promise that in the process of debugging the September bug, SST 
    become EVEN FASTER than has EVER been quoted.  You will see the 
    notes.  I give you my word.
  
                              ----------------
    
    In reply to the base note, I have much hands-on with the SST. I am 
    willing to answer ANY questions about it, have written articles about 
    why the way it is, and even stripped copyright from them so they can 
    be reprinted by anyone who wants. I want people to know why the SST 
    is the way it is; I believe in power without major bucks, to "coin a 
    phrase".
  
    Performance figures on the SST, of course, depend on how much power 
    you pack into it; it is VERY flexible and runs at a variety of clock 
    speeds. But that is not dodging your question. What figures would you 
    like? Q-Index says about 160% of a TT when we have the pedal flat on 
    the floor. There is Jim Ness' fine benchmark, whose figures I would 
    post if I could access them (their storage media is down for another 
    2 hours). Tell me what you would like!
  
         ... kinda, draw your own conclusions ...
  
                              ----------------
  
    ....you need to bear in mind that we have in-waiting lines of liter-
    ally hundreds of people (and remember ten hundreds is a thousand) for 
    product.  We have told people repeatedly to "get in line as fast as 
    you can" because of this.
  
    * Spectre GCR has ->never<- gotten out of back-order, ever, in all 
    the time it has been for sale. I have NEVER been able to grab say 20 
    off the shelf, go to a show, and sell them. They have all been pre-
    sold. <- SST and MegaTalk are the same way.
  
    You will *see* users that have gotten their boards discussing them 
    online, but as for ordering them, well ...
  
    It is a damned difficult business, requiring 100% perfection, to line 
    up all the parts needed for a board, the board, get it scheduled for 
    soldering, test it, get the manual and virus-free disk, and finally 
    put it all in a nice looking box. It's like a 100-input AND gate. Any 
    ONE thing goes wrong, ptooey. And needless to say there is an 
    avalanche effect ... must schedule things, and one little thing going 
    wrong meets you must break about 7,124 dates and schedules.
  
    People like Tom Harker [ICD] that regularly get hardware out are 
    heroes every day.
  
                              ----------------
  
    The SST is TOTALLY user configurable. You pay for speed as you want 
    it; if your groceries need the money that week, that's cool. When YOU 
    feel like it, plug in more or faster SST RAM and watch your speed go 
    up; when YOU feel like it, pop in a faster oscillator or CPU or FPU. 
    George has done a remarkable job of making the board so flexible.
  
    SST gives you ALL sorts of options to help you keep compatible with 
    your software -- I mean, you want the board to work with your stuff, 
    right?
  
    I have long loved slots, user options, letting the user decide, 
    speed, and compatibility, as Spectre 128/GCR show. I have seen WILD 
    Spectre configs and they work fine. I believe in what we're doing and 
    I do not believe I know better than you what you need.
  
                              ----------------
  
    The specs on the SST have never changed since it debuted at WAACE a 
    year ago -- except, and I can prove it, it has gotten faster, more 
    compatible, and does things that even Motorola doesn't believe 
    possible. It is nice developing on a *stable* hardware platform. (I 
    have worked at outfits where things changed every week - *shudder!*)
  
                             ----------------
  
    I personally believe that the user community is pretty much bewil-
    dered about this 68030 stuff, and is just going with the company they 
    trust.
  
    Gadgets has a real good rep for speed and compatibility, and you will 
    see some things in the 68030 SST that are being called "impossible" 
    right now. That makes my day! Hey, it's impossible to run Mac stuff 
    on the ST, too ...
  
    I also STRONGLY believe that this IS the ST market, and that you MUST 
    put out a product at a reasonable price. We pulled every chip off the 
    SST we could and when it broke we stop. That cuts our costs, then it 
    cuts yours. We DIDN'T succumb to the urge to put the latest nifty-
    keano widget toaster controller on it. We DID give you a board you 
    could populate ON A BUDGET -- and heck, one of our Beta Testers is 
    posting notes on how to beat our prices on the parts like RAM and 
    CPUs. We're not suppressing him; we're not deleting his notes. We 
    think it is great.
  
    The SST was built from the ground up for the user to configure. You 
    can buy as much speed as you want, until your ears bleed when you 
    open a window. (Don't laugh until you see, say, 40 Mhz running on 60 
    ns. RAM, with Dave's Little Performance Thingo in your AUTO folder). 
    You are going to forget, as I have forgotten, the *sight* of the 
    "open / close" window animation -- it happens too fast.
  
    When you've maxxed the board, we gave you an expansion slot (which is 
    really many of them). We've already SHOWN a WORKING product for it -- 
    and we have something insanely, wonderfully great we're brewing for 
    it. You are not going to believe it, and I'm totally psyched!
  
    There is so much cool new software -- Dynacadd TT, Avant Vector...and 
    it needs an ST of the 90 's to fly. I mean, you should SEE "Sudden"'s 
    demo at 40 Mhz ... it becomes, "Oh-My-Gawd!"
  
                             ----------------
  
    I have a Toshiba-San with a 286SX at 16 MHZ. I compare to ST. And 
    there is NO comparison. I believe that that operating system belongs 
    in the dark ages, with witch burnings.
  
    I *fundamentally* believe that what we are all in search of *is a 
    better way to keep track of our data* -- and the ST is no slouch. 1:1 
    hard disks, indeed! Try that on a PC (*chuckle*)
  
    Sure,I have thought about going Mac or Windows. But I am in a small 
    pond (no pun intended) and I'm dealing with people I *like* -- I 
    hardly ever get a loonie-tunes-type phone call -- and I like my life.
  
    Do I REALLY want to start shelling out, I dunno, $50,000 for one full 
    page color ad in MacWorld that people will flip through? Heck, no.
  
    I honestly believe ST users, despite everything, have one of the best 
    kept secrets, and the best machines, you can find. Lordee, just try 
    moving directories on the Toshiba. The Mac is slightly better ... 
    well, that is you don't get a crash. They need a crash recoverer BAD.
  
    It's like 2:30 AM and I'm up; Sandy is in the next room getting SST 
    and MegaTalk boxes ready. People have given us money for GCR and in 
    turn we've given them back new stuff that keeps the ST *more* than 
    competitive for the '90's. And I see a resurgence in ST software that 
    makes my whole week -- check out Codehead GT stuff. Try it with an 
    SST and you can't go back.
  
    Maybe I ought to just loan an SST to every user group for a while...


         David Small, engineer, bottle washer, & hacker
  
         Gadgets by Small, Inc.

                            -----------------

 Until next week.....



           ____________________________________________________





 > Tracker ST 3.0  STR Review    "TrackerST 3.0 is a terrific program.."
   ==========================




                         ***  TRACKER/ST 3.0  ***
                THE MAILING LIST/DATABASE & MAIL MERGE TOOL



 by Dana P. Jacobson



      Do you maintain your user group membership listing?  Do you keep
 track of newsletter subscriptions?  Do you have hundreds of business cards
 all over the place?  Does your business maintain any kind of customer
 list?  Do you send out regular mailings to clients?  Do you need an easy
 way to send out those 'thank you' letters for wedding/graduation gifts? 
 Class reunion coming up soon?

      If you answered 'yes' to any of these questions; or you can
 substitute a similar task - Tracker/ST is the software tool that will do
 it all, and much more.

      Assuming that most of you belong to a user group or any organized
 club or association, there will probably be a membership list.  Most or-
 ganizations have annual memberships, newsletters, dues, etc.  Tracker/ST
 will allow you to easily keep track (no pun intended!) of members' yearly
 dues and newsletter subscription renewal dates.  Also, you can maintain
 unlimited notes about each member and/or subscriber.  Tracker/ST will also
 allow you to create letters, reminders, and announcements to the member-
 ship without the need to type each one individually.  It even has its
 own text editor for creating letters and various notes.  Tracker/ST also
 allows you to create, edit, and save multiple mailing label formats.

      The minimum hardware requirements are a 1-meg machine (color or mono)
 and a double-sided floppy drive.  It's recommended that you use Tracker/ST
 on a hard drive system because of speed and the capability of maintaining
 large databases.  Obviously, you'll probably want to have a printer for
 taking advantage of the program's hard copy features (letters, labels,
 etc.).  Installation of the program is quick and painless.  Once you've 
 got the program installed, finish reading the manual and take advantage of
 the couple of tutorials included.  Once you've done so, using the program
 will be very easy, almost intuitive.

      Tracker/ST has three main areas: The "Entry Screen", the "Power
 Station", and the "Quick Letter".  Each area has its own drop-down menus,
 buttons, and keyboard commands (quick keys) to make moving around and ac-
 cessing various functions a snap.  Whichever method, or combination, works
 best for your - use.

      The "Entry Screen" is pretty straightforward.  This is the area where
 you'll enter all of the data that you want to include in your listings. 
 This includes first & last names; a salutation (how you want to address
 this person in your letters); company name (if any); 2 street address
 fields; city, state, ZIP,and country; home, work, and FAX numbers.  There
 are also fields for a "category", "rank", "date", "I.D. number", short
 "notes", "source", and the option to include "long notes" for each entry. 
 These last few fields can be set up for your various needs.  For instance:
 category can signify a member or non-member; rank can be used to determine
 months left in membership or subscription; date can signify renewal time;
 I.D. number is self-explanatory (or you can devise something entirely dif-
 ferent); notes can be used for anything, usually a reminder of some kind
 (ex.: John has 20 friends who are buying STs and want to join the group
 next month!); source could signify how each member learned of the group;
 and long notes can be used to create a memo on each person entered which
 might include info about each member's system, favorite programs, etc. 
 The Entry Screen also allows you to move back and forward, one entry at a
 time; or you can fast-forward or rewind which will display each entry
 quickly.  You also have the ability to add a person at any time; search
 for any entry, edit an entry, or delete one.

      One of the best and unique features of the Entry Screen is the
 ability to set defaults for _any_ of the fields that you wish to include. 
 In one of the drop-down menus, you can access a "default" menu and fill in
 whichever defaults you wish to include, saving you the trouble of typing
 them all in individually for each entry.  For example, if your entries are
 all from the same city, state, and zip code - you can put those items in
 the default menu and those fields will already be 'completed' when you
 enter new names (provided you chose to use defaults!).  It makes a time-
 consuming task a lot easier.

      You can create new databases, load an existing one, rename an exis-
 ting one, delete one, import names into a current database, and more.  You
 can edit, browse, update, view, and sort any and all fields, at any time,
 as well.  And, there are even more options available!

      The "Power Station" is another of the integral areas of Tracker/ST. 
 The Power Station is the area where you can display the various Tracker
 reports that are available.  It's here that you can also print labels and
 mail merges.  The Power Station consists of three main areas: "Report Set-
 tings", "Mail Merge Settings", and "Label Settings".  You're also given
 the opportunity in this area to set a "filter" so you can display only 
 those entries matching the filter setting, i.e., all entries listed from
 Texas.

      The "Report Settings" area is defined by choices you make in a
 Reports drop-down menu.  You can display the report type, primary sort,
 and grouping.  You have the option to display headers and footers; and
 also choose between a full or summarized report.

      The "Mail Merge" settings are also defined from a drop-down menu. The
 primary setting here is which letter template you want to use (if any). 
 The other setting options refer to how you want to position various parts
 of your letter: top margin to allow for pre-printed letterheads; and date,
 return address, and sender's address offsets.

      The "Label Settings" are fairly obvious.  Just select the correct
 settings from the menus.  The label area is also where you can select your
 printer type.

      At the bottom of the Power Station screen, there are six selector
 buttons, two for each of the three settings areas.  The "Run Report" but-
 ton will allow you to run a report, according to your settings, to either
 the screen (a great preview option!) or to actually print out a copy. 
 "Page Width/Length" allows you to set your paper size (width by characters
 and length by lines).  "Mail Merge-Print" allows you to determine how your
 merge will be sorted (filter) and then the merge will print.  "Form Feed"
 will allow you to send a form feed command to your printer, if needed.  
 "Labels Print"  allows you to set a filter also (which entries to print
 labels), how many of each, and then print.  "Test Print Labels" is a good
 way to determine if all of your label settings has been done properly for
 the type of labels you're using.  To save those expensive laser printer
 label pages, test on plain paper first and see if they line up correctly.

      The final major area in Tracker/ST is the "Quick Letter" area.  It is
 here that you can use any of the Mail Merge letter templates as a single
 letter to any of your database entries.  Different than a mail merge, a
 quick letter is sent to only one person rather than those meeting the mail
 merge filter.  You can edit any of the mail merge templates before prin-
 ting without making any permanent changes to the original template.  It's
 like being able to add some personal remarks to the template and having
 the ability to maintain the original letter for future use!

      The Quick Letter screen has selector buttons helping you to select
 which Mail Merge template to use in a Quick Letter; and others to help you
 determine to which person you wish to send the letter.  The "Build Quick
 Letter" selector button prints the letter to the screen, addressed to the
 person selected.  In this area, you can still do any editing that you
 like.

      Tracker's text editor, according to the manual, "...contains may
 powerful features such as automatic reformatting, variable margins, and
 different style attributes."  The text editor also has abilities of typi-
 cal word processors also, such as cut, copy & paste, delete/insert lines,
 etc.  Available text styles include italics, bold, and underlining.  There
 is also an optional ruler to set margins.  Unlike most text editors, 
 however, you cannot move Tracker's around on your hard disk, or to flop-
 pies.  Tracker's text files are part of the program itself, so must remain
 where "placed" by the program.

      According to Nevin Shalit, many of the suggestions made by Tracker
 users have made it to this upgrade.  Some of the "significant" (my term,
 not Nevin's) are duplicate name warnings, telephone dialing (this may NOT
 be used as a telecommunications program!), auto salutation field,
 unlimited filters, and the ability to open a second file in the background
 (allowing you to copy names from the Entry Screen).  Also, the export/im-
 port menus are now combined into one menu item.

      Tracker/ST includes printer support for Epson printers (9 and 24
 pin), the NEC 24 printers, Diablo-compatible daisy wheel printers, the
 SLM804, and the HP DeskJet and DeskJet Plus, BubbleJet printers,
 LaserBrain printers, and the Star NX 10 printers.  Supposedly, the
 Panasonic laser printers are supported using the HP driver, but I had no
 luck with it.  It's been promised that the problem will be alleviated
 shortly.  There's also an area within the manual that describes how you
 can create your own printer driver by just writing the correct printer
 codes into your favorite word processor (save it in ASCII).  A sample is
 included in the manual, or display any of the .PRT files on your Tracker
 disk for more.  It will also help if you have your printer manual handy to
 find out the correct codes required!  I managed to write a driver for my
 Panasonic laser, but was only successful getting italics and underlining
 to work; bold is being stubborn!!

      Overall, if the need presents itself in such a way as I described
 early on in the review, TrackerST 3.0 is a terrific program to utilize.  I
 recommend it highly, and wish that I had picked it up earlier.  If you
 have an earlier version, upgrade it now or at the Chicago Atari Show, be-
 cause the upgrade is significant according to Nevin. 



              ______________________________________________




 > STR Portfolio News & Information           Keeping up to date...
   ================================



                         THE ATARI PORTFOLIO FORUM
                         =========================

 On CompuServe


 by Judith Hamner  72257,271


     They keep going and going and going...Our programming marathon is in
 full swing!  FW.BAS is a fuel monitoring program for small aircraft.
 Uploaded by Robert Kelsoe as a companion to the other aircraft programs.

 PA06.TXT contains issue number six of Portable Addiction.  We have a host
     of calculator and conversion type utilities. WEEKDY.BAS uploaded by bj
     Gleason will give you the day of the week and other information about
     a given date. MATHFC.ZIP is a command line calculator modified by bj
     to run on the Port. PRIME.BAS will choose the prime numbers from a
     given range.

 CC30.BAS is a conversion calculator by Hugh Campbell. This Pbasic program
     will do conversions between various units of measure. CVERSI.ZIP is a
     worksheet uploaded by Bruce Martin for converting among US, Imperial,
     and metric measurements.

 PMAP.COM is a memory map to show programs loaded into memory by bj
     Gleason.

 BALANC.ZIP contains a worksheet for keeping your checkbook balance
     uploaded by Bruce Martin.

 PTRS12.ZIP is a version of Portris modified for those using the German
     keyboard.

 Don Messerli has created a new version of Pgedit.

 PGED12.ZIP lets you create and edit a PGC file on a desktop PC.

 PGCONV.ZIP by bj Gleason will convert among various graphic file formats.

 PGL.ZIP contains a .PGC file launcher by David Stewart. You will be
     presented with a menu of the PGC format files in order to select one
     for viewing.  There are two new collections of .PGC pictures.

 PFPICS.ARC uploaded by bj Gleason contains an assortment of pictures.

 AUTOS.ZIP by Don Messerli contains pictures of 14 auto emblems including
     BMW, Ferrari, Saab.

 DBSH12.ZIP is a new version of Dbshow by Don Messerli. Featured is a new
     field type which lets you store music in a database file.

 CVT.ZIP, an accessory, lets you convert dBase III character files to
     Dbshow graphic or music files. 

 BOX.ZIP is a utility to draw ASCII boxes on an 80 by 25 screen by David
     Stewart.

 CAROL.BAS is a Pbasic program to play Christmas Carols.

 POORSP.ARC is a simple speller to lookup words in an address book.

 BJ Gleason has written two utilities.

 DVORAK.ZIP will remap the keyboard to the Dvorak layout.

 CLOCK.BAS will put a real-time clock on the screen.

 TW12.EXE is a shareware program from RSE. This trip organizer will handle
     to do lists, flight itinere, schedule, expenses, etc.



           _____________________________________________________
      




 > Chicago STR SHOW NEWS     CHICAGO ATARI SHOW;  MIDWEST EXTRAVAGANZA!
   =====================



                         CHICAGO COMPUTERFEST INFO
                         =========================



 Compiled by Michael Lee


 The Chicago ComputerFest is just around the corner, only about one week 
 away (the weekend of November 23th and 24th). The Chicago show looks to 
 be one of the hottest shows of the year.  Almost everyone who is anyone 
 in the Atari community will either be there or be represented.  If you 
 are going to be in the Chicago area that weekend, this is a show that 
 you shouldn't miss!!
  
 I know that you've seen all of the blurb's about the Chicago show in the 
 online magazines but I thought that the following posts would give you a 
 few more details about some of the folks who are going to be there and 
 what they're going to show.  From the ST Roundtable on Genie (Category 
 11, Topic 10).

  
                      Chicago ComputerFest by Atari 
                                C/O LCACE
                              P.O. Box 8788
                         Waukegan, IL 60079-8788
                  708-566-0682 (Order and Show hotline)
  Please Make Checks Payable to "Lake County Area Computer Enthusiasts"
              We accept Master Card and Visa for all orders

                      GEmail - M.Brown56, L.Grauzas
                          Compuserve - 70416,144
                       America Online - SteveK7611
  
                             ----------------
  
 From Mike Brown (President of LCACE - One of the show's organizers) - 
 Msg's. 256/223/225/258/285....
  
 In talking with the nice people at Atari Entertainment - I am told that 
 there will be a limited quantity of collectable gifts given to the first 
 Chicago ComputerFest paid admissions on Saturday morning.
  
 I'm not at liberty to tell you specifics about what will be given away, 
 but I am told that everyone receiving one will be most happy that they 
 took the time to get to the show early to get one!
  
 Hats off to the good folks at Atari Entertainment (you know, the LYNX 
 people) for their generous donations!
  
 Stop by the Atari Entertainment booth and play pre-production versions 
 of the _newest_ LYNX games, and speak with the Atari Entertainment staff 
 about game playing tips and techniques all day Saturday and Sunday.
  
 I have a very good friend at Motorola-Chicago, and he has promised me 
 that one of their MPU techs will be available for a seminar. It could be 
 quite enlightening.
  
 From what I understand, the Motorola guest will be an "in the trenches"
 tech 
 guy and not a sales person.
  
 I spoke with our good friends at USRobotics today, and they regret that 
 they will not be able to attend the ComputerFest in person as they had 
 originally planned to.
  
 To "make it better" they are planning to send us a Courier Dual Standard 
 9600 modem for the door prize raffle.
  
 Cool, huh?
  
 Anyone who is interested in ordering a show T-shirt can have one for a 
 special price of $8.50 (XL and XXL $9.00). Order by leaving credit card 
 info in GEmail or call the show hotline. You must order before Nov 17th 
 to get these prices.
  
 The shirts will be teal blue with the show logo in white- very snazzy.
  
                             ----------------
  
 From Bob Brodie (Atari) - Msg. 264....
  
 Excitement is really growing here in Sunnyvale for this show! We have 
 had an incredible number of our employees come as ask to attend this 
 show and exhibit "the latest and greatest".
  
 This is the current list of our representatives, subject of course to 
 change:
  
    Bill Rehbock, Director of Technical Services
    Art Morgan, Technical Marketing
    Don Thomas, Director of Portfolio Marketing
    Bob Brodie, Director of Communications
    Mike Groh, Dealer Sales Coordinator
    James Grunke, Director of Music Markets
    Art Pruzynski, Project Manager, Atari UNIX
    Dianne Guerrero, Atari UNIX support
    Greg Pratt, President Atari Computer Corporation
  
 And as our special guest for our Canadian friends, making this a truly 
 international event, Geoff Earle, General Manager of Atari Canada Corp 
 and Mark Campbell of Atari Canada will also be on hand!!
  
                             ----------------
  
 From Bob Brodie (Atari) - Msg. 248...
  
 Looks like this show is shaping up to be a great one!  We at Atari are 
 grateful for the fine, professional work being done by the Lake County 
 ACE in putting on this show.
  
 Bill Rhebock and Greg Pratt have arranged for three of the workstations 
 that we have used at COMDEX, Seybold, and other professional exhibitons 
 to be shipped to Chicago for display in our booth. While this is just a 
 small example of the type of professional booth we use, I hope that the 
 attendees will find it to be much different that the "traditional" type 
 of table & drape look. No doubt we'll have some of that, too! :)
  
 I'm looking forward to seeing all of you at the show! Chicago is a great 
 town, and the Ramada is a perfect site to take the family for a get a 
 way kind of weekend...let them relax while you enjoy the show, then join 
 us all for the banquet!
  
                             ----------------
  
 From Bob Brodie (Atari) - Msg. 157...
  
 I was pleasantly surprised to get a call at the office yesterday from 
 Liz Mitchell of Migraph! She and Kevin will be exhibiting at the Chicago 
 Computerfest!! They have some exciting new OCR software that they plan 
 on unveiling at the Chicago show, in addition to a couple of other new 
 products.
  
 Atari Canada has also expressed an interest in attending the show, 
 either as an exhibitor, or to offer seminars of interest to our North of 
 the border friends! In the absence of a TAF Show this year, this may be 
 the best opportunity for our Canadian Atarians to attend a major show, 
 close to home!
  
                             ----------------
  
 From Henry Murphy (M.S. Design) - Msg. 201....
  
                         P R E S S   R E L E A S E 

 We at MS Design spent our summer vacation working for you! We will debut 
 30+ totally new fonts at the Chicago Atari show November 23rd and 24th, 
 1991, at fantastic introductory prices.
   
 Plus, we have licensed, from a major Mac clip art company, a library of 
 over 7000 images!! All these clip art pictures are new and never before 
 available on the Atari! They will be in EPS, CVG and/or IMG format and 
 color EPS will be available soon after. While all 7000 won't be ready 
 for the Chicago show, we will have plenty there and will keep cranking 
 them out over the next year or two.
  
 Come to our booth in Chicago! Save big money on your DTP needs! Make us 
 happy!  Make yourself happy!  Help support Atari DTP!
  
    Power Without The Price
      Henry & Carl & Brian & Brenda & Kim & Bob &...
  
 PS. Bring a copy of this to the show and we'll knock $5 off of whatever 
 price we have given you...
  
                             ----------------
  
 From John J. @ Atari Explorer - Msg. 238...
  
 Atari Explorer is headin' out to the LCACE show, and are we psyched! 
 We'll be givin' away the usual thousands of copies of magazines, taking 
 subscriptions at ridiculously low discount prices, and in-between, doing 
 as much scoping of new product as will fill the next three or so issues.
  
 See you all there!  Don't be strangers!  Introduce yourselves!  Ask 
 questions about journalistic integrity!  Make pointed suggestions about 
 content!  Above all, subscribe!
  
 Note to musicians: Pete Donoso and I, hot off our MIDI special issue (on 
 newsstands RSN!) will be bringing keyboards and guitar, respectively. We 
 are going to do a redux of the infamous "WAACE 2:00 AM Sheraton Reston 
 Jam," so don't plan on getting much sleep! Leave a message for me (John 
 Jainschigg) at the hotel, if you want to receive a special "come to the 
 party" call to tell you where the party is.
  
 This time, however, we'd like to formally invite other Atari musicians 
 to join in. The theme is (nod to Chicago) "The Blues." So get those axes 
 tuned up, and put those shades on, and get ready to play down the Atari 
 Explorer staff -- "Not only the most-literate, but the most-musical 
 Atari magazine around!"
  
 Be there, or be a quadrilateral planar section, characterized by equal 
 sides and 90-degree interior angles!
  
                             ----------------
  
 From George at JMG Software - Msg. 240....
  
 I'd like to give a few more details about our presence at the Chicago 
 Computerfest.
  
 JMG Software will be showing off the long awaited Version 1.6 of Hyper-
 LINK featuring new object linking features, report generation, networ-
 king, and lots of other goodies.
  
 Version 1.6 is scheduled to start shipping at the Chicago show, and we 
 will also be introducing information about run-time and run-only ver-
 sions of HyperLINK as well as programmer's information for module deve-
 lopment.
  
 Best of all, we'll be featuring examples of some of the latest applica-
 tions developed under HyperLINK, to help people get an idea of what this 
 program can really do.
  
 Look forward to seeing you all there!
  
                             ----------------
  
 From Darek M. @ Branch Always Software - Msg. 247...
  
 This is to confirm that Branch Always Software will be attending the 
 Chicago Atarifest. To avoid the sellouts like we had at Glendale and 
 WAACE, we will be bringing 200 copies of Quick ST 3 to the show. The 
 first 200 people to upgrade or buy Quick ST 3 will get it at the show, 
 after that we will have to take orders.
  
 I will personally be there and I will be bringing a notebook PC to 
 demonstrate a very early prototype of GEMULATOR. I will be hosting one 
 of the seminars where I will demonstrate this, and if necessary I will 
 hold private demos after the show.
  
 At the booth, I will be demonstrating both the ST and TT versions of 
 Quick ST 3. If anyone requests it, I can also demonstrate the ST and TT 
 versions of Xformer (the 8-bit emulator) as well as the PC version of 
 Xformer (running on the notebook PC!). Note that a very limited number 
 of Xformer disks will be available for sale (i.e. 5 or so).
  
 If you have any further questions, feel free to call me any week night 
 between now and the Chicago show between 9pm and midnight Pacific time. 
 I will be around to answer your calls. At other times (midnight to 9pm) 
 you will get the hated Branch Always answering machine. The number is 
 206-885-5893.
  
                             ----------------
  
 From John Nagy @ AtariUser - Msg. 255...
  
 I'll be there at the show with plenty of the latest issues of AtariUser 
 for everyone too. I won't get to Chicago til 6 AM on Saturday morn. Hope 
 I don't wake ya'll up!
  
                             ----------------
  
 From Linda Peckham @ Electronic Spinster Graphics - Msg. 262....
  
 Hi, everyone! Mike suggested that us seminar-types should post a des-
 cription of what they're talking about, so here goes...
  
 "Spinning Bits Into Images" will be a talk about creating clip-art from 
 scanning, to finished product. Talk will include tips on using a hand- 
 scanner, and Migraph's Touch-Up. Silhouette and Avant Vektor may also be 
 mentioned. The talk will be given by Linda Peckham, owner of Electronic 
 Spinster Graphics, a supplier of IMG and vector clip-art.
  
 PS -- Anyone who likes lots of clip-art is invited to find me at the DTP 
 Headquarters, booths 32-34. I'll have *all* my clip-art available, with 
 printouts of everything available to look at. And my prices are very 
 good (I've had two people tell me the prices are too low!) :)
  
                             ----------------

 From Charles Johnson @ Codehead Software - Msg. 263...
  
 Hi folks! Just a quick note to remind everyone that we will be both 
 showing and _selling_ our new product, MegaPaint Professional, at the 
 Chicago Computerfest! MegaPaint is already priced well under $200, and 
 we'll have a show special as well; so stop by the CodeHead booth and 
 check it out!
  
 Oh yes ... and be prepared to HANG ONTO YOUR SOCKS. Because MegaPaint is 
 going to redefine your concept of what a paint/draw program can do. 
 Really.
  
                             ----------------
  
 From D.A. Brumleve @ Kidprgs - Msg. 266...
  
 Yes, we'll be there, stocked to the gills with copies of our popular 
 offerings for your holiday giving! What child wouldn't be thrilled with 
 a copy of Kidpublisher Professional, Kidpainter, Super Kidgrid, or 
 Telegram?  No child of _mine_, let me tell you! And we are offering our 
 typical Show Special!
  
    $10 off with the purchase of any two programs!
  
 What's that you say? Your child already _has_ Kidpublisher Professional, 
 Kidpainter, Super Kidgrid, _and_ Telegram? Fret not, Dear Customer, 
 because we know your child will be thrilled with our...
  
    ComputerFest Surprise!
  
 Yes, indeed! Our booth also will contain some marvelous surprises, never 
 before seen by human eyes outside our beta-test sites! New programs, new 
 versions of old programs, and kid-friendly, child-tested Atari parap-
 henalia as well!
  
 In addition, a major shock to many will be the presence of my mysterious 
 educational consultant, the invisible man whose efforts have made the 
 difference between great kidprgs and superb kidprgs! Michael L. Marks, 
 M.Ed., educational consultant and teacher extraordinaire, will regale 
 Fest-goers with anecdotes from his classroom experience in a seminar on 
 Saturday morning: "Using the Computer to Foster Creative Thinking". Mr. 
 Marks will also be available for educational chit-chat in the D.A. 
 Brumleve booth throughout the show.
  
 So see you there! - Booth #16
  
                             ----------------
  
 Gordon M. (Aladdin) - Msg. 274...
  
 Tim Purves and I will both be at the show representing GEnie. If you 
 read the last conference schedule you will note that there will be 
 conferences about GEnie on Saturday and Sunday. I hope to see you there.
  
                             ----------------
  
 From Deron K. @ Softlogic - Msg. 275....
  
    Hands on PageStream Classes

 Soft-Logik Publishing Corporation is proud to present In Depth, Hands-
 On, Desktop Publishing training courses using PageStream page layout 
 software.  Two courses, "An Introduction to Desktop Publishing with 
 PageStream" and "Advanced Publishing Solutions with PageStream" will be 
 offered at the Chicago ComputerFest by Atari on November 23-24.
  
    The Instructors
    ===============
  
 The lead instructor, Dan Weiss, is Vice President of Research and 
 Development at Soft-Logik Publishing Corporation. Dan has extensive 
 computer based publishing experience on several computer platforms as 
 well as a background in hands-on, group training. In his position as VP 
 of R&D, Dan sits on the "bleeding edge" of computer based publishing and 
 is well versed in today's technologies.
  
 Assisting Dan will be Mark Wetzel. Mark is Director of Product Support 
 at Soft-Logik Publishing Corporation, and the "face" of Soft- Logik 
 Publishing Corporation at most trade shows. Mark has headed up the 
 technical support team for PageStream since it's introduction and is a 
 storehouse of knowledge concerning the product.
  
    The Classes
    ===========

 "An Introduction to Desktop Publishing" will focus on getting to know 
 what computer based publishing is, and what it can offer you. Using 
 PageStream on an Atari computer, each student will be able to design, 
 create and modify several projects ranging from fun to serious.Finished 
 examples, class outline, course materials and related literature will be 
 provided to each student as part of the class.
  
 This class is recommended to anyone who has an interest in finding out 
 what desktop publishing is and what it has to offer them.  No prior 
 training or experience is required.
  
 "Advanced Publishing Solutions with PageStream" dives into the sometimes 
 confusing world of professional computer publishing. Major topics will 
 include color publishing, PostScript imaging, graphics manipulation, and 
 large document control. This session will focus on using PageStream in a 
 professional environment to provide solutions.
  
 Finished examples, class outline, course materials and related litera-
 ture will be provided to each student as part of the class. This class 
 is recommended to those with at least some background in computer based 
 or traditional publishing that want to better understand color and high 
 quality publishing.
  
 Reservations are highly recommended to attend the classes. Class cost is 
 $15, plus admission to the Chicago Computerfest by Atari!
   
                             ----------------
  
 J.Trautschold @ Missionware Software - Msg. 280....
  
    Missionware Software is proud to annouce the introduction of:
  
                           ***** FLASH II *****
  
                       at the Chicago Computerfest!
  
 This is the long awaited update to one of the most popular ST terminal 
 programs ever. It's been completely rewritten in assembler and includes 
 a TON of new features! Here are just a few:
  
 ~       Compatible with old Flash DO files
  
 ~       Individual setups for each BBS and includes 20 separate macros
         for each BBS!
  
 ~       Displays RLE & GIF pictures either on or off line!
  
 ~       Supports: TTY, VIDTEX, VT52, ANSI, VT100, VT102, VT200 & VT300
  
 ~       Includes an Automatic Answer Mode!
  
 ~       Includes full featured GEM text editor with block commands, cut 
         & paste, search & replace, paragraph reformatting, adjustable 
         tab settings, page widths and more!
  
 ~       Supports the ST, IBM and DEC character set!
  
 ~       Includes Silent Line for background file transfers!
  
 ~       Has built in support for ASCII, Xmodem, Ymodem, Zmodem, CIS B+, 
         Kermit and other protocols.
  
 ~       Logs all on line time and keeps track of costs!
  
 Again, these are only a few of the many new features of Flash II. Make 
 sure to stop by Booth 17 for full details, including a chance to play 
 with this exciting new program.  A fully functional version will be 
 available for you to try.  An official demo is also being scheduled. 
 Check the seminar times for details.
  
 Although the program will not yet be ready for sale, we plan on handing 
 out coupons so that you can get on the mailing list and be one of the 
 first to receive your copy when it's ready for sale, sometime in 
 December. The program is 99% completed and a professionally produced 
 manual is in the works.
  
 This is one program you won't want to miss checking out!
  
 ----------------
  
 From Craig Harvey @ Clear Thinking - Msg. 284...
  
 Clear Thinking will have EdHak 2.25 available at the show for the spe-
 cial price of $16.00.  Updates are just $5.00.  This update includes 
 features such as tab <=> space conversion, output to midi port for musi-
 cal hackers, automatic search (& replace) continuation for files larger 
 than the buffer, automatic continuation of a RAM search if the match 
 found isn't the desired one, abortable/suspendable printing, faster text 
 display, etc. Also available will be the Metapsychology Primer, inc-
 luding a 200 question personality analysis, tutorial, and mental exer-
 cises to play around with. Just $10. Or get both this and EdHak for just 
 $23.00.

 ----------------
  

            ___________________________________________________






 > SILHOUETTE VERSION 1.25 STR InfoFile        "ADVANCED AUTO-TRACING"
   ====================================



 RELEASE ANNOUNCEMENT!


                          SILHOUETTE VERSION 1.25
                     DEBUTING AT CHICAGO COMPUTER-FEST


 Power Priced Affordably and.. at a GREAT price at the Show!

 New  Features:
 Improved auto-tracing, advanced duplication  methods, grid/ruler, new GEM
 display, full documentation, 68881 and TT support, Postscript output.


    Maxwell Computer Products Unlimited will debut Silhouette Version 1.25 
 at the Chicago Atari Computer-Fest.  Silhouette is a bit-image and vector 
 graphics  drawing  program  with  auto-tracing  function.   Version  1.25 
 enhancements  include  new  drawing  functions,  improved  interface  and 
 advanced auto-tracing function.

    In  keeping with Atari's motto of 'Power without the  Price',  Maxwell 
 has  advanced the drawing capabilities of Silhouette while maintaining  a 
 modest price.  While Atari users can now pay $200.00 or more for imported 
 software, Silhouette is being offered for just $94.95*.

    Silhouette  offers a formidable array of drawing  features;  some  you 
 will find nowhere else.  The program's GEM interface has been improved by 
 placing the toolbox permanently to the left of the screen.  The  dropdown 
 menus and tools are presented in a no-nonsense GEM display.

 Silhouette Features:

 - ADVANCED AUTO-TRACING FEATURE:

      Load  bit-images and automatically convert them to  vector  graphics 
 (which  offer  higher quality and  more  editability).  The  auto-tracing 
 function  has been advanced beyond V.1.0 and much closer to  auto-tracing 
 functions which cost hundreds more. Further details below.

 - DRAWING TOOLS:

    ~ LINES.  Depress the CONTROL key for horizontal/vertical lines or ALT 
      key for multiple lines (star pattern).

    ~ POLYLINES  convertible to/from multi-point beziers,  standard 4  pt. 
      beziers or to b-splines.

    ~ Multi-point BEZIERS or standard 4 point bezier curves and  B-SPLINES 
      curves.

    ~ FREEHAND PENCIL which can also draw with the B-spline smoothing on.

    ~ Sizable bit-image ERASER and SPRAYCAN, FLOODFILL.

    ~ ROUND EDGE BOX. Each corner independently adjustable.

    ~ RECTANGLE.  Begin  rectangle from left corner or from center  and/or 
      restrict to a perfect square.

    ~ ELLIPTICAL/CIRCULAR ARCS. Hitting the SPACE-BAR will shift the mouse 
      pointer amongst the three defining pts.      (center, 2 angles). 

    ~ ELLIPSES/CIRCLES.  Ellipses  and circles are convertible  to  BEZIER 
      curves (allowing warping).

    ~ STARS.  Create multi-point stars (up to 99 points).  While  defining 
      size and location,  also define the inner      diameter of the  star 
      and the number of points with the ARROW KEYS.

    ~ POLYGONS.  Create polygons with up to 99 sides adjustable while  you 
      size and locate.

    ~ PARABOLAS.  A conic section (e.g.,  ellipses,  circles,  hyperbolas) 
      common to optics and a great addition to the drawing family.

    ~ SPIRALS.  Employed  by  the  nautilus,  the  DNA  structure and  now 
      available in a ST/TT drawing program. As you draw, adjust the number 
      of windings, the steepness of the wind or unravel the spiral.

    ~ TEXT.  Type with GDOS fonts.  Includes FSM-GDOS support, skewing and 
      rotation to 1/10th degree.

    ~ Also  in  the  TOOLBOX is a scrollable  array  of  FILL PATTERNS.

    ~ WILD  CARD TOOL ICON.  Select a favorite drop-down menu  option  and 
      declare the icon as its controller.

 - EDITING TOOLS:

    ~ POLYLINE EDIT.  Edit any line, polyline, freehand line, bezier or b-
      spline.  Polyline  points  snap to other points  by  depressing  the 
      CONTROL key. SCROLL the mouse pointer from point to point by hitting 
      Q or E(directional) and DELETE/ADD POINTS by hitting the key A or D.

    ~ ROTATE,  MIRROR,  FLIP.  Define the amount of rotation to the 1/10th 
      degree.

    ~ WARP,  SIZE. Select any number of objects and reshape. One can skew, 
      trapezoidally skew,  stretch/resize or free-corner warp.  And all  a 
      quickly  selectable by depressing a CNTRL/ALT/SHIFT key  combination 
      (the choice  is  shown on the info line).  If unsatisfied  with  the 
      edit, just hit the ESCape key to return to the original shapes.

    ~ DUPLICATION.  Duplicate in three ways: along a polyline, distributed 
      along  a  line or duplicated by  input horiz/vertical  displacement. 
      While duplication occurs you can choose to have the size,  rotation, 
      line width or fill adjusted as it duplicates.

    ~ CONVERT  TO.  Convert polylines to and from  b-splines,  beziers  or 
      simple polylines.

    ~ CUT or MERGE POLYLINES.  Cut any polyline or curve at any point.  Or 
      merge any two lines at any two ends.

    ~ CLEAR, INVERT, RASTER OUTLINE in bit-image graphics.

    ~ WORK  and OBJECT CONTROLLERS.  One can set a ruler system,  snap  to 
      grid,  snap  to  INDEPENDENTLY  SET SNAP POINTS or  snap  to  object 
      geometric points.  Group objects, bring to top, send to bottom. Bit-
      images  have  two CLIP buffers and vector graphics  has  a  separate 
      COPY and CUT buffer. Buffers remain as files which can be reloaded.

      THREE  WINDOWS  are available.  One offers  bit-image  drawing,  the 
      second vector graphics and the third, pixel editing. Vector Graphics 
      can  be  magnified up to 16 times,  giving  the  equivalent  drawing 
      resolution of 3200  DPI.

 AUTO-TRACING:

      Auto-tracing  is a form of artificial intelligence.  The  Silhouette 
      auto-tracing function is presented a clip-area and with its  special 
      rules  searches  the  complete image  area  for  image outline.  The 
      outline is saved as polylines and optionally the image's outline  is 
      purged of  un-needed points and the curves are smoothed by  bsplines 
      or beziers. 

      As  vector graphics,  images can be more easily edited  and  without 
      losing image quality.  Furthermore vector images are usually smaller 
      files and processed by printers more quickly.

 FILE INPUT/OUTPUT:

    ~ BIT-IMAGE.  Loads DEGAS (compressed),  MacPaint,  IMG, TINY. Outputs 
      IMG bit-image files.

    ~ VECTOR  GRAPHICS.  Load  GEM and GEM  3.0  metafiles.  Saves  vector 
      graphics in GEM metafile (including 3.0),  DXF universal CAD format, 
      and POSTSCRIPT EPS format (readable by Adobe Illustrator, Pagestream 
      and Calamus).

 DOCUMENTATION:

      Full documentation is now offered in a three ring binder and case. A 
      simple HELP menu is available from the HELP key.

 COMPATIBILITY:

      Silhouette runs on all ST and TT computers in High ST resolution, or 
      in  TT high resolution and on big screen monitors.  It supports  the 
      MATH  COPROCESSOR  with the ST and also is offered in a  special  TT 
      version  which takes advantage of the 32 bit architecture of the  TT 
      (upcoming update will support the 68881/68882 in the TT). Silhouette 
      requires just 1 Mbyte. Silhouette has been recompiled in an advanced 
      compiler offering greater efficiency and compact code.

 LOOK FOR US AT THE CHICAGO-FEST SHOW. 

 Purchase Silhouette directly from its U.S. developer:

      $94.95 + handling (call for shipping choice, overseas
                         shipping at reasonable cost)

                              Maxwell C.P.U.
                          2124 W. Centennial Dr.
                           Louisville, CO 80027

                    (303)666-7754,  Mon-Sat, 8-5PM MDT.
                  VISA, MASTERCARD, personal check, COD.


             ________________________________________________





 > CODEHEAD NEWS! STR InfoFile  ** GENUS FONT EDITOR & CHERRY FONTS! **
   ===========================



  For immediate release
  
  CodeHeadQuarters
  Friday, November 15, 1991
  -------------------------

         .........................................................
         :                                                       :
         :   CodeHead Software announces the Genus Font Editor   :
         :                         Plus                          :
         :      A Full Line of High Quality Calamus Fonts        :
         :              The Cherry Font Collection               :
         :.......................................................:


 CodeHead  GT  is  proud  to  present  the  next release in our new line of
 graphics  tools  --  Genus,  the  full-featured  font  editor  for Calamus
 typefaces!    And  to  go  with  our  new  font editor, a complete line of
 top-notch Calamus fonts: the Cherry Fonts for Calamus collection.

   GENUS
   -----

 At last, a font editor for Calamus  that's  easy  to  learn  and  use, but
 powerful  enough  to  create  professional  results.   Used by top ST type
 designers, Genus is the editor  of  choice  for  Calamus  typefaces.   Its
 interface is  easily learned, and remarkably powerful -- all your commands
 are on-screen at once, with automatic help functions that remind  you what
 each command  does as  you pass  the mouse cursor over it.  You manipulate
 fonts simply by dragging points, lines,  and curves  around.   And many of
 Genus's features  are specially  designed to aid in the creation of vector
 fonts, like the ability to automatically  generate smooth  curves with one
 simple command, and its unique global and optical kerning methods. 

 Here are a few of Genus's excellent features:

   :: Utilizes the full screen of the SM124 monochrome monitor

   :: Easy cross-hair cursor and alignment rulers

   :: Four freely positionable zoom levels with pan and scroll. 

   :: Character cell change anytime with one mouse click. 

   :: Load two fonts at once and transfer characters between them. 

   :: Two clipboard buffers with copy, move or shuffle mode. 

   :: Large font name label editor. 

   :: Full function calculator with easy single entry configuration for
      Rotation, Italics, Vertical Horizontal Mirror, Expansion and
      Condensing. 

   :: Freely placed rotational center point. 

   :: All calculator and kerning functions can operate globally. 

   :: Kern bar offset or tab kerning options. 

   :: Scanned bitmapped image loading for easy tracing. 

   :: Rubber box for quick selection of multiple points. 

   :: Save any character as a single Calamus Vector Graphic file. 

   :: Loads ALL Calamus format fonts. 

   :: Import  Publishing Partner or PageStream fonts for conversion to     
      Calamus fonts. 

   :: Single click access to all installed desk accessories. 

   :: Built in screen saver. 

   :: Large screen compatible. 

   :: Absolutely no royalty fees for commercially produced work. 

   :: The Genus disk includes FIVE FREE high quality fonts, including
      Calais Medium and Italic, Cherry Stems (dingbats), Chisel Nib
      Black, and Punch.

     Watch for a demonstration version of Genus to  be posted  on the major
     online services very soon.


   CHERRY FONT COLLECTION
   ----------------------

     Whether  you  design  corporate  reports,  edit  a newsletter, lay out
 advertisements, or just send greeting cards, you'll discover  the solution
 to  all  your  font  requirements  under  one roof in the Cherry Fonts for
 Calamus collection.   Each  and every  scalable outline  font is carefully
 drawn  by  a  type  professional  and  spaced  properly  using  techniques
 perfected by the type foundries of old.  The quality and variety  of these
 typefaces is  comparable to the expensive fonts sold by other companies --
 but our reasonable prices and enormous  selection  will  let  you  build a
 library of  professional fonts without breaking the bank! Cherry Fonts can
 be used by any application that loads Calamus format fonts.  They  are not
 copy-protected and can be easily modified with the Genus font editor.


   AVAILABILITY
   ------------

     The  Genus  Font  Editor  is  available  NOW, and retails for $175.00.
 Cherry Fonts will be  available starting  December 1,  1991; there  are 13
 different "font  packs," some containing more than one typeface, and their
 retail price is $42.95 per pack.  Please call for a more complete descrip-
 tion of  the many  high quality typefaces available.  A poster showing all
 fonts in the collection is also available on request. 

 For more information, contact your local dealer, or:

                             CodeHead Software
                               PO Box 74090
                           Los Angeles, CA 90004
                            Tel (213) 386-5735
                            Fax (213) 386-5789




      _______________________________________________________________





 > STReport's Editorial Page                 "SAYIN' IT LIKE IT IS!"
   =========================
   

   From the Editor's Desk
   ----------------------


     The Chicago Atari "super" Show is right around the corner.  At this
 time, I am broken hearted to announce that I will not be attending this
 promising event.  Without going into detail, let's just say its due to
 circumstances beyond my control.  That does not and will not affect
 STReport/ABCO's pledge of a Grand Prize, a complete Quantum 105mb hard
 disk system with ICD host and software.  The show's offerings are detailed
 in this issue for everyone's information and help in planning their atten-
 dance.  This show has promise.
  
     It appears that Missionware Software is the winner in the "Who will
 import Flash II" scenario taking place for the last few months. 
 Congratulations are in order for Missionware Software.  Originating from
 Australia, Flash II has been firmly guided along its path to the USA by
 the very capable Charles Cherry for the author Paul Nichols.  A number of
 rather well known north american software publishers have been involved in
 considering the marketing of Flash II.  STReport wishes all the success
 possible to Mission Software in this fine undertaking.

     With the economy taking a real dive this weekend, the market is down
 over 100 points today, along with the colder than usual weather... It
 wouldn't hurt for all of us to remember the homeless and needy in our own
 areas.  After all.. what goes around, comes around.  Since its already a
 proven fact, children are definitely among the homeless this year, let's
 pay particular attention to and for them.  Normally I try to avoid the
 stark, harsh reality of the overall news, this is however one subject that
 needs addressing.  So, please, if you have extra, send it their way. 
 After all, its only the right thing to do.
  
     Be sure to check out the Press Releases from Codehead GT and Maxwell
 Software's about product debuts for the Chicago Show.
   
               Thanks for your superb support!
  
                                         Ralph......






  """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

 > STR Mail Call             "...a place for the readers to be heard"
   =============


                            STReport's MailBag
                            ==================




 from GEnie ST RT

 Category 14,  Topic 22
 Message 34        Tue Nov 05, 1991
 M.MURRAY18                   at 03:35 EST
  
 Ed & Dan & others who've helped so far--

     The 745-2000 number worked and I finally got to talk to Carl after a
 week of trying.  Sadly, he says my only recourse since the 90 warranty has
 expired is to give him $300 and ship my computer to him and he'll give me
 a new one. He admits that my computer was probably one of the one's
 shipped with a flaky DMA but says he doesn't have a list of serial
 numbers to check.

     I've never bought a product before that a company admitted was defec-
 tive and didn't have some kind of fix-it plan.  I guess the next step is
 to call service centers and see how much it would cost to replace the DMA
 with a good one.  How does one check this port within 90 days if they
 don't own a hard disk yet? I have to wonder about other items on my com-
 puter that I've never tried.  Do all the joystick ports work?  How about
 the external floppy drive ? Are we really expected to test everything on
 the computer in 90 days ?

                Sorry for the soapbox, but frustration is mounting.
                                       --Thanks again.
                                           Michael



        __________________________________________________________




  STReport's Staff              The regulars and this week's contributors!
  ----------------

                            Publisher - Editor
                            ------------------
                             Ralph F. Mariano


          PC DIVISION         AMIGA DIVISION           MAC DIVISION
          -----------         --------------           ------------
          Robert Retelle      Charles Hill             R. ALBRITTON


  STReport Staff Editors:
  -----------------------
          Michael Arthur      Lloyd E. Pulley, Sr.     Dana P. Jacobson
          Lucien Oppler       Brad Martin              Judith Hamner
                    John Szczepanik          Dan Stidham

  Contributing Correspondents:
  ----------------------------
          Michael Lee         Richard Covert           Roger Stevens
          Brian Converse      Oliver Steinmeier        Tim Holt
          Andrew Learner      Norman Boucher           Ben Hamilton
          Neil Bradley        Eric Jerue               Ron Deal
          Robert Dean         Ed Westhusing            James Nolan
                    Joe Mirando              Vernon W. Smith

                             IMPORTANT NOTICE
                             ================
      Please, submit letters to the editor, articles, reviews, etc...
                              via E-Mail to:

                 Compuserve.................... 70007,4454
                 GEnie......................... ST.REPORT
                 Delphi........................ RMARIANO  
                 BIX........................... RMARIANO 
                 FIDONET....................... 112/35       
                 FNET.......................... NODE 350   
                 NEST.......................... 90:19/350.0   


       ____________________________________________________________





 > STReport CONFIDENTIAL        "REPORTING ABOUT ATARI...NOT FOR ATARI!" 
   =====================
  
      * "Rumors - Tidbits - Predictions - Observations - Hot Tips" *
         ========================================================


 An observation......
  
 What a wonderful manner in which to gain plenty of joyful, enthusiastic
 support for one's company....  One Atari employee's way of winning
 friends and influencing people favorably for Atari...  

 From GEnie's ST RT

  ------------
 Category 26,  Topic 2
 Message 361       Fri Nov 01, 1991
 TOWNS [John@Atari]           at 19:57 EST
  
  I would like to point out for the record, that Atari has NEVER
  announced that TOS 1.6 could be used on any 680x0 processor.

  TOS Versions are guaranteed to work on the hardware they are designed
  to work with. Nothing more, nothing less.

  To be honest, I am disgusted with the way you are bannering this in
  the section describing the file. You are alarming alot of people about
  something that most won't care about and is isn't a problem. It does
  NOT affect the operation of your STE computer at all.

  I plan to ask the SysOps to remove the reference to Problems with TOS 
  1.62 in the header to ST Report. It is completely deceptive and just 
  an attempt to get people to download ST Report.

  -- John Townsend, Atari Corp.

  ------------

 Category 26,  Topic 2
 Message 362       Fri Nov 01, 1991
 DARLAH [RT~SYSOP]            at 23:40 EST
  
 John:

 I did indeed get your letter but in reviewing it, I decided to place it
 out.  The banner is indeed a leader but no worse than any others in ST
 Report or the other magazine.

  ------------

 Editor Note;
   Thank God there are still level thinking heads in this frantic world.


 Category 36,  Topic 20
 Message 174       Mon Nov 11, 1991
 TOWNS [John@Atari]           at 03:29 EST
  
 Atari has no comment on anything that isn't announced.  We can't comment
 on anything called a Jaguar, because as far as Atari is concerned, it
 doesn't exist.

 How can you expect me to confirm or deny specification details on a thing
 that doesn't exist?

 -- John

 PS. As far as I know, none of the Jaguar cars that I have seen have
     any kind of dual processors, VHS capabilities, etc. as standard
     equipment :-)



 Category 36,  Topic 20
 Message 184       Thu Nov 14, 1991
 TOWNS [John@Atari]           at 22:04 EST
  
 In a previous message, S.JOHNSON10 [Steve] writes:
 - TOWNS - Now John, how can you say that "as far as Atari is concerned,  
 - [the Jaguar] doesn't exist."?  Is Sam T. no longer any kind of official 
 - voice of Atari (WE WISH!!! <grin>)?  If Sam T. says that Atari is       
 - working on the "Jaguar", which is a "64-bit" "RISC-based" "well under   
 - [$300]" "[game] console", how can Atari say now that the Jaguar doesn't 
 - exist?  PLEASE, just simply state that Atari can't comment if it can't  
 - rather than going on about this smart-ass "what's that?" BS.  C'mon!    
 - EVERYONE knows Atari's working on the Jaguar, and it has been more than 
 - just Sam T. publicly acknowledging its existence, so Atari _HAS_ in ef
 - fect acknowledged the Jaguar's existence.  Did someone just overhear Sam 
 - T. talking in his sleep (which has to be the ONLY way he can talk)?

 Yes, Steve.. you are right.  You are always right.  I still refuse to com-
 ment on anything called a Jaguar or any projects that Atari has not
 specifically shown at a trade show. (i.e. Announced Publicly!)

 Sorry if this doesn't suit your needs, but I like my job and I intend to
 keep it. ;-)

 -- John Townsend, Atari Corp.

  ------------
 Editor Note;
 This inclusion of these "colorful messages" was meant to portray the
 "trick bag" many Atari employees are inadvertently placed in.  It is NOT
 meant to ridicule or chastise any of the individuals responding in such a
 manner.  If the head of the company elected to "tout" a product, for
 whatever reason in an international publication and in an online conferen-
 ce, then it stands to reason the very same executives of the company
 should prepare the employees to answer questions about the same products
 made mention of.  They should Not be threatened with their jobs.  At the
 same time, a "feisty" employee should be well prepared to receive the
 equivalent of anything dished out in a "weak moment or two.".


       _____________________________________________________________





 > A "Quotable Quote"
   ==================



         "FRANK AND EXPLICIT -- that is the right line to take...
                 when you wish to conceal your own mind...
                    and confuse the minds of others..."


                                        ..... Benjamin Disraeli



        __________________________________________________________




 > ABCO SPECIALS! STR InfoFile    * NEW HOLIDAY Prices!  MORE Products! *
   ===========================       *** SUPER ***  HOLIDAY SPECIALS!


                        ACT NOW LIMITED TIME ONLY!
                     CLIP AND INCLUDE WITH YOUR ORDER!

                       ** EFFECTIVE IMMEDIATELY! **

                        ABCO COMPUTER CONSULTANTS 
              P.O. Box 6672  Jacksonville, Florida 32236-6672
                                Est.  1985
                 _________________________________________

                   Voice: 904-783-3319  10 AM - 4 PM EDT
                     BBS: 904-786-4176   12-24-96 HST
                    FAX: 904-783-3319  12 PM - 6 AM EDT
                 _________________________________________
                                        
                   HARD DISK SYSTEMS TO FIT EVERY BUDGET
                 _________________________________________
                                        
   All systems are complete and ready to use, included at NO EXTRA COST
                 are clock/calendar and cooling blower(s).
                                        
            *-ALL ABCO HARD DISK SYSTEMS ARE FULLY EXPANDABLE-*
                    (you are NOT limited to two drives)
                   (all cables and connectors installed)
                                        
    * ICD HOST ADAPTERS USED EXCLUSIVELY * OMTI HIGH SPEED CONTROLLERS *
      * ICD ADSCSI+ HOST ADAPTERS * FULL SCSI COMMAND SET SUPPORTED *
                  * SCSI EMBEDDED CONTROLLER MECHANISMS *

              -- QUANTUM: THE "ROLLS ROYCE" OF HARD DRIVES --

                  WE PAY SHIPPING & INSURANCE!!!  >UPS!<
                                (Cont. USA)
               Deluxe 2 bay Cabinet w/65w auto-switching PS

                   TIME PROVEN to be the most reliable!
            Model        Description      Autopark       Price
            ==================================================
            SGN4951      51Mb 24ms   3.5"    Y          439.00
            SGN6277      65Mb 28ms   5.25"   Y          469.00
            SGN1096      85Mb 28ms   5.25"   Y          549.00
            SQN2055     105mb 12ms   3.5"    Y          599.95
            SQN1296     210Mb 12ms   3.5"    Y          879.00
            ==================================================
                 FULLY ASSEMBLED SCSI DRIVES DEDUCT $60.00
               ADD $35.00 for 4 BAY SUPER CABINET w/250+w PS
              EXOTIC TOWER CABINETS AVAILABLE Call for Info!
              PLEASE NOTE: The above is partial listing only!

                 FULLY ASSEMBLED SCSI DRIVES DEDUCT $60.00
               ADD $35.00 for 4 BAY SUPER CABINET w/250+w PS
              EXOTIC TOWER CABINETS AVAILABLE Call for Info!
              PLEASE NOTE: The above is partial listing only!

          CPU ACCELERATOR & MEMORY UPGRADES AVAILABLE & INSTALLED

              >> ABCO now offers 1040 & MEGA STe Computers <<
                             (when available)
                   Call for ABCO's Introductory prices!

                  ATARI COMPUTERS * STILL THE BEST VALUE!

           If you don't see what you want listed here, call us.
            Odds are, we either have it or, can get it for you!

                        AT THE BEST POSSIBLE PRICE!
                            ** 800-562-4037 **
                         "We service what we sell"

                      ****** SPECIAL - SPECIAL ******

     * SYQUEST 44MB (#555) >> ABCOFILE "44" << REMOVABLE MEDIA DRIVE *

          - SYQUEST 44 MB DRIVE         - ICD ST ADSCSI PLUS H/A
          - ICD Utility Software        - 3' DMA Cable 
          - Fan & Clock                 - Multi-Unit Power Supply
                          (1) 44 MB Syquest Cart.
                --->> SPECIAL! NOW ONLY __$ 645.00__ <<---
                   **** SCSI UNITS -> ONLY $585.00 ****

                   WE PAY SHIPPING & INSURANCE!  >UPS!<
                                (Cont. USA)
                  COMPLETELY ASSEMBLED AND READY TO RUN!
                    Cart and Utility Software Included!

                        EXTRA CARTS:      $  74.50
                        DRIVE MECH ONLY:  $ 349.95

                      ****** SPECIAL - SPECIAL ******

   * TWIN SYQUEST 44MB REMOVABLE MEDIA DRIVES ... PROGRAMMER'S DELIGHT *
                       SPECIALLY PRICED ** $1019.00 **
                       Includes: * TWO * cartridges!

    * SYQUEST 44MB REMOVABLE MEDIA DRIVE AND HARD DRIVE COMBINATIONS *
         - Syquest 44 Model [555] and the following hard drives -

         ** 50mb SQG51S   $819.00     105mb SQG105S    $1019.00 **
                       
                 LOWBOY - STANDARD - DUAL BLOWER CABINETS
                      CUSTOM CONFIGURATIONS AVAILABLE

           Listed above are a sampling of the systems available.
      Prices also reflect various cabinet/power supply configurations
    (over sixty configurations are available, flexibility is unlimited)

      ALL UNITS COMPATIBLE WITH --> SUPERCHARGER - AT/PC SPEED - GCR
           LARGER units are available - (Custom Configurations)

                      *>> NO REPACKS OR REFURBS USED! <<*

       - Custom Walnut WOODEN Cabinets - TOWER - AT - XT Cabinets -

                Atari SLM 804, SLM 804PCV Laser Toner Kits 
                            Memorex 2108, 5287
         Oasys Laserpro 5287, 5308, Express 830, Express Series II
                       Silver Express, Gold Express
                      ** $41.95 shipping Included **

                      Atari SLM 605 Laser Toner Kits
        AT&T 593, CAF Laser, DSI Laser, DTP Systems, Epson EPL-6000
         Facit P6060, Fontx Syslaser, Harris3M 2006, M-Tally MT905
       Microtek Turbo PS, OAS Laserpro Executive, Packard Bell 9500
                     TEC LB 1305, Toshiba PageLaser 6
                      ** $41.95 shipping included **
                          (TWO Toner Carts Incl.)

                        Panasonic Laser Toner Kits
           Panasonic KX -P4000 series, Panafax UF-750 Facsimile
                      ** $41.95 shipping included **

                    -- ALL TONER KITS  * IN STOCK * --

                       * Toner Starter Kits-$62.95 *
                    * Replacement (804) Drums-$186.95 *

                    ABCO's Replacement Toner Advantages
                    ===================================

     A Few Pointers about the NEW and SUPERIOR replacement Toner Cartridges
     for the SLM 804 and SLM 605 Laser printers.
  
 Quality
 -------

      o  Better density the OEM Toner under all testing conditions.
         (AVG 1.40-1.50)
  
      o  Formulation completely compatible with the OEM initial toner and  
         supply toner.  This replacement Toner may be added to the Laser   
         Printer along with OEM initial toner or supply toner.
  
      o  The NEW replacement initial toner will maintain a high level of   
         quality "much longer" using the replacement toner.
   
      o  Much smaller drop in density is realized when printing in the     
         continuous mode.

     Test Pattern:
                     10 graphic pages
                     1000 text pages  (3 alternating pages)

     Time Schedule:
                     330 prints continuously
                     1 hour pause, 3-4 times a day
                     normally 1000 copies a day
                     maximum 1400 copies a day


                   OEM                        ABCO'S NEW STANDARD
                   ---                        -------------------

     Density       1.30 - 1.40                        1.40 - 1.50

     Yield         92.1 g/1000 copies                 95.3 g/1000 copies

     Waste toner   20.3 g/1000 copies                 14.3 g/1000 copies

     Transfer Rate       78%                                85%

               >> MANY other ATARI related products STOCKED <<
                      ALL POWER SUPPLIES UL APPROVED

                       -* 12 month FULL Guarantee *-
                         (A FULL YEAR of COVERAGE)

                   WE PAY SHIPPING & INSURANCE!  >UPS!<
                                (Cont. USA)
                 QUANTITY & USERGROUP DISCOUNTS AVAILABLE!
                 _________________________________________

                     DEALERS and DISTRIBUTORS WANTED!
                         please, call for details

                 Personal and Company Checks are accepted.

                        ORDER YOUR NEW UNIT TODAY!

           CALL: 1-800-562-4037   -=**=-    CALL: 1-904-783-3319
           Customer Orders ONLY               Customer Service
                                9am - 8pm EDT
                                Tues thru Sat

                ABCO is EXPANDING!!  CALL FOR INFORMATION!


                                GOOD NEWS!
                                ==========

 ABCO  Computer  Consultants  now  has  a  SUPER  computer  goodies catalog
 available.   Drop us  a note  and we will mail your copy to you!  You'd be
 surprised at the variety of  products  we  offer  at  substantial savings.
 Don't  wait!    Send  for  your  catalog  now  and get the great Christmas
 Discount Coupons.  It'll make Santa feel great about the holidays!
  
                         ABCO COMPUTER CONSULTANTS
                         =========================
                               P.O. BOX 6672
                     Jacksonville, Florida, 32205-6672
                               904-783-3319



 """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
                  STReport International Online Magazine
     Available through more than 10,000 Private BBS systems WorldWide!
 """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
 STReport              "YOUR INDEPENDENT NEWS SOURCE"     November 15, 1991
 16/32bit Magazine          copyright   1987-91                     No.7.45
 """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
 Views, Opinions and Articles Presented herein are not necessarily those of
 the editors/staff,  PCReport, STReport, AMReport, MCReport.  Permission to
 reprint articles is hereby granted, unless  otherwise noted.  Each reprint
 must include  the name of the publication, date, issue #  and the author's
 name.  The entire publication and/or portions therein may not be edited in
 any way  without prior  written permission.   The  entire contents, at the
 time of publication, are believed to be reasonably accurate.  The editors,
 contributors and/or staff are not responsible for the use/misuse of infor-
 mation contained herein or the results obtained therefrom.
 """"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""