STOS FIXER VERSION 3.0 (C) 1994 Robert Quezada Release date: May 10, 1994 USE THIS AT YOUR OWN RISK. I WILL NOT BE RESPONSIBLE FOR ANY LOSS OF FILES. Brief Description ----------------- This program was written using HiSoft Basic 2.10. It calculates the STOS values required for STOS interpreter and STOS compiled programs for virtually all TOS versions. Requirements ------------ This should work on any TOS version, on machines with 512k minimum, and any resolution. It requires that the file is not compressed (with ATOMIK, PACK-ICE, etc.). It will check if the file is compressed and will often not write the changes to the file, but if it does, it changes the original file extension to .123, so that you will always have the original file. NOTE: ----- DO NOT USE THIS PROGRAM TO UPDATE COMP_xxx.PRG (the STOS compiler file) or C3D.PRG (the STOS 3D accessory program) BECAUSE THEY WILL NOT WORK PROPERLY AFTERWARDS. If the file is compressed, it can be decompressed with Mega Depack, which is available on GEnie(file #24286) and probably on other network systems. FIXES ----- Ver 2.0 The joystick address finding routine has been fixed to work with less joystick movement. In order for it to work, the joystick must be in port #1 (not the mouse port, in case you didn't know). Then, just follow the on screen instructions and then the address will be found. Ver 2.1 Can now be placed on the desktop and will fix STOS files if the programs are dragged onto it. If your TOS supports that (which should be any TOS version 2.05 or higher), then click on STOSFX27.PRG once, and then go to the INSTALL APPLICATION menu on the desktop. You must install the default directory as APPLICATION and the parameter as FULL PATH. Then, you drag the icon onto the desktop and save the desktop, so all those changes will be saved. Every time you want to fix a file so it will work on your TOS version, all you have to do is drag the file to be fixed onto the STOS fixer's icon, it will fix the file for you and then return to the desktop. Run time STOS programs are now supported in this version. They are fixed in the same way that compiled STOS programs are fixed. One example of this would be Psycho Pig 2 (available on GEnie). On disk 1, BOOT.PRG is a run time STOS program. Version 2.6 (August 1993) ------------------------- NOT RELEASED TO PUBLIC DOMAIN Calculations of the last 2 values in the table were incorrect, but is now fixed for the Falcon030 and some other STs in previous versions. Version 2.7 (NOVEMBER 1993) --------------------------- Now supports MULTITOS!!!!! This file uses only 128Kb of memory and should work with files of any size. Files are only partially loaded in blocks no longer than 4096 bytes long, in order to conserve memory. I finally got this program to work. I had to rewrite Version 2.1, because of a problem encountered with a cache program that erased all the files on my Falcon030. That's why it took so long. Joystick calculating routine has been incredibly speeded up so it only now takes about 1 second to get the correct value. In the window, there is now a listing of important values used by the program, so if there is any problem using it on your system, you can just tell me the numbers it found to help figure out the problem. DEFAULTS.DAT is now renamed to DEFxxxx.DAT where "xxxx" is the TOS version and all the values are listed in hexadecimal to make it easier to read. All *.PRG files can be dragged onto the STOSFX27.PRG icon (if using a TOS version that supports putting icons on the desktop). Version 3.0 (May 1994) ---------------------- Translated to HiSoft BASIC 2.10 from GFA Basic due to the fact that I had the program crash under MultiTOS numerous times. Now, it uses resource files to display the menu instead of graphic calls. This gives the program a cleaner look and provides 3-D buttons on AES versions that support it. It works really well under MultiTOS. I have had no crashes as of yet while running it. A bug was fixed in this version. If a directory had a "." in it, the "123" file created would be put in some unknown place instead of in the correct directory. This no longer is the case. Other Notes ----------- FOR TOS Versions 4.0 and higher: -------------------------------- The MMU cache doesn't need to be disabled. Also, don't run the interpreter or game files under MultiTOS as they will cause an "Illegal instruction" error, or something like that, and they will not run. For some reason, after the addresses are put in the table, the program may not work. Just change the ".PRG" extensions to ".TOS" for game files. But the interpreter and run-time files must be auto- booted. All STOS files must be run in ST resolutions. Doing this should make the files work without a problem on your TOS version. The speed increase is amazing in comparison with an 8 MHz STe. FOR EVERY TOS VERSION: After it finds the joystick address it will ask you if you want to save the results as defaults. If you select YES, then it will save the results to disk to the default file. These values will then be in memory every time the program is run so that when you want to allow other STOS compiled programs to work on your TOS, you don't have to go through constant testing of the joystick address. When it writes the file to disk with the changes it also turns the FastLoad option on. If you have any questions, comments, or anything else you want to tell me, or if this just doesn't work at all, send me e-mail to: (R.QUEZADA) on GEnie or (72122,2651) on CompuServe. Robert Quezada. There may be a chance that this might not work on early STs with the TOS 2.06 conversion board. I think that I have fixed the problem with the original program so that it will now work on those STs. But if it doesn't, the default values that are supplied with the program are for TOS 2.06 Also available: Punkman jr 2 (Atari Portfolio) ------------------------------- Vertical scrolling Pacman clone that runs really fast and smooth. Instead of the normal 240x64 graphics resolution of the Portfolio, you get a scrolling screen with a 240x200 graphics resolution.