Info-Atari16 Digest Fri, 7 Jun 91 Volume 91 : Issue 321 Today's Topics: arc602.ttp or unarc.ttp question BART Help File communications software FSM-GDOS...When? How? G++ from ftp.thp.koeln.de IS AT atari.archive (2 msgs) gcr (2 msgs) Latest ver. of Prospero-C?? LINE F More than 4 Meg ?? (2 msgs) NVDI Reading 8-bit disks with an ST (2 msgs) Requirements for g++ SED for ST? Umich atari Uniterm V2.0e 010, was: ST User Virus! XTERM.COM, Communications software Welcome to the Info-Atari16 Digest. The configuration for the automatic cross-posting to/from Usenet is getting closer, but still getting thrashed out. Please send notifications about broken digests or bogus messages to Info-Atari16-Request@NAUCSE.CSE.NAU.EDU. Please send requests for un/subscription and other administrivia to Info-Atari16-Request, *NOT* Info-Atari16. Requests that go to the list instead of the moderators are likely to be lost or ignored. If you want to unsubscribe, and you're receiving the digest indirectly from someplace (usually a BITNET host) that redistributes it, please contact the redistributor, not us. ---------------------------------------------------------------------- Date: 7 Jun 91 13:12:53 GMT From: math.fu-berlin.de!opal!gmdtub!prosun!ralph@uunet.uu.net (Ralph Berg) Subject: arc602.ttp or unarc.ttp question To: Info-Atari16@naucse.cse.nau.edu Hi, How can I tell arc602.ttp or unarc.ttp to store on extraction the files into another directory as where the archiver programms resides??? When I use unarc.ttp with "x c:\tmp\any.arc" the extracted files will be stored where the unarc program is called ?? Who has any idea ??? Thanks. ---------------------------------------------------------------------- Ralph Berg, Reichenbergerstr.89, D-1000 Berlin 36, West Germany during day 030/25499151 German National Research Center for Computer Science, FIRST ralph@prosun.first.gmd.de ---------------------------------------------------------------------- ------------------------------ Date: 7 Jun 91 15:43:31 GMT From: noao!ncar!elroy.jpl.nasa.gov!sdd.hp.com!caen!umich!terminator!terminator.cc.umi ch.edu!weiner@arizona.edu (Jeff Weiner) Subject: BART Help File To: Info-Atari16@naucse.cse.nau.edu {There's been a literal ton of mail this week on how to use bart. I hope this will clear up a few questions. Please read it very carefully, and then ask questions. People who don't read it and ask first will be shot. People attempting to subvert the quota system will also be shot. People who watch Viva Las Vegas on the Disneyt Channel this evening will also be shot. But, I digress.... -weiner} The Terminator Atari Archive Help File Welcome to BART, Brode's Archive Retrieval Thang, Terminator's Atari mail server. To use the server, send a message to atari@atari.archive.umich.edu. The subject line is ignored. The body of the message should contain, one per line, any of the following commands. Each of the commands sends its output back to you via mail. "help" This command tells BART to send you this file. "index" This command tells BART to send you the Index. Currently, the index is a listing of all the files int the Atari area. Descriptions of various files can sometimes be found in the Index file of each directory. These must be requested individually with the send command. They are currently incomplete, but it's all we have for now. "path mail-address" This command tells BART where to send the requested files. This is useful for specifying a mail path. "send directory/filename" This is the command that sends out files from the archive. The server only lets you get files from the subdirectories in the atari tree. You can determine the path and filename from the Index file. For example, if you wanted to get arc, you'd send a message with a line in the body that looked like send archivers/arc.ttp to get the index file, use send Index Binary programs are uuencoded before they are sent out. If you miss parts of a file, rather than re-request the whole thing, you can give BART a comma separated list of the parts you are missing and it will send you those parts. For example... send languages/gcc.arc aa,ac,af This is the only way to get files larger than 400K. You must request the file by parts until you have the whole thing. A full part is approximately 30k of data. Note: BART does not accept wildcards such as ? or *. "sendb directory/filename" This is similar to the send command except that it always uuencodes the files that it sends out. Send tries to determine whether it is sending a binary or ascii file and only sends uuencoded messages when necessary. While the commands are not case sensitive, the filenames are, so be careful you are using the correct case before complaining that the server is broken. You are limited to 400k and/or 5 files per day. It takes 24 hours from the time that bart received your last message to clear your quota records. BART does not queue requests that went over quota and send them out later. You have to re-request them 24 hours later. BART tends to ignore your mistakes. You will not receive a message back if you gave an illegimate command or specified a bad file name. This was a deliberate design decision. It may not be user friendly, but it keeps the mail queues short and prevents a couple other nasty things. Submissions are always welcome. Please mail them to weiner@atari.archive.umich.edu Jon Brode -- jon@atari.archive.umich.edu brode@math.lsa.umich.edu Terminator Atari Archive Moderator -- Jeff Weiner --- weiner@{{sklyab,felix}.engin, atari.archive}.umich.edu ------------------------------ Date: 7 Jun 91 09:52:26 GMT From: mcsun!unido!rwthinf!cip-s01!wolfram@uunet.uu.net (Wolfram Roesler) Subject: communications software To: Info-Atari16@naucse.cse.nau.edu 6600hien@ucsbuxa.ucsb.edu (Hien Le) writes: >Hello everyone! I've never used a modem before. Hello Hien, Any modem will do, try to get one with at least 2400 baud. More will be expensive, less is too slow, but 2400 is just correct. Communication software is a very simple thing, just reading from RS232 and displaying on screen and reading from keyboard and sending to RS232. So, terminal programs use to give a lot of other features, like RS232 configuration, automatic dialing (most modems can do this so the software simply has to send a string to the modem to dial a number), capturing (writing everyting that was sent and received into a file) and many, many more. My favourite terminal prg is Rufus, a German produkt with a nice user interface and many features. Another one is Uniterm which also gives a lot of features. Try to get one of these, connect your modem and off you go. It's really easy, all you need is the phone number of a nearby mailbox (BBS). Be sure to set the communication parameters to 8 bits, no parity, 1 stop bit (usually written 8N1), this will do for almost all BBSs. Most BBSs support 2400 baud and are able to determine what speed you are using so there is no need to care about this, even if the BBS supports 9600 baud or something like this. Have fun! CU \/\/olfram ------------------------------ Date: 7 Jun 91 17:35:32 GMT From: fs7.ece.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!mc4c+@sei.cmu.edu (Mark Choi) Subject: FSM-GDOS...When? How? To: Info-Atari16@naucse.cse.nau.edu I can only add one bit of info. Goldleaf told me the other day that they will offer FSM GDOS to their registered owners of WorldFlairII for their cost from Atari, when it ever sees the light of day. Ie, get WordFlairII if you want FSM GDOS when it comes out. -mark- ------------------------------ Date: 7 Jun 91 15:49:49 GMT From: otter.hpl.hp.com!hpltoad!ghiggins!gjh@hplabs.hp.com (Graham Higgins) Subject: G++ from ftp.thp.koeln.de IS AT atari.archive To: Info-Atari16@naucse.cse.nau.edu Correction (I have been reorganising the structure and contents of The G++ code. --------------------------------------------------------- total 860 -rw-r--r-- 1 gray 7696 Jun 7 06:02 FList -rw-r--r-- 1 gray 1645 Jun 7 05:34 README.G++ -rw-r--r-- 1 gray 425580 Jun 6 03:12 g++-139.lzh -rw-r--r-- 1 gray 1271 Jun 7 05:34 gnu++.g -rw-r--r-- 1 gray 116352 Jun 6 03:12 inc++.lzh -rw-r--r-- 1 gray 291236 Jun 7 05:35 lib++.lzh --------------------------------------------------------- Koeln's gcc and support (nm, as, ar, ld, etc). total 816 -rw-r--r-- 1 gray 405281 Jun 7 09:20 unikoelnbin.lzh -rw-r--r-- 1 gray 405835 Jun 7 09:20 unikoelngcc.lzh --------------------------------------------------------- Some shell utils (cp, rm, mv, etc) total 216 -rw-r--r-- 1 gray 205006 Jun 7 09:20 unikoelnsh.lzh When I have leaned how to incant the spell which splits binaries into neat chunks, I will provide the above split into U**x mail-compatible chunks. Graham ====== ------------------------------------------------------------------ Graham Higgins | gjh%ghiggins@hpl.hp.co.uk Hewlett-Packard Labs | gjh%ghiggins@hplb.hpl.hp.com Filton Road, Stoke Gifford | gjh%hplb.csnet@csnet-relay.arpa Bristol, U.K. | ...!mcvax!ukc!hplb!gjh Tel: +44 272 799910 x24014 Fax: +44 272 790554 ------------------------------------------------------------------ Disclaimer: My opinions above are exactly that, mine and opinions. ------------------------------------------------------------------ ------------------------------ Date: 7 Jun 91 15:51:33 GMT From: otter.hpl.hp.com!hpltoad!ghiggins!gjh@hplabs.hp.com (Graham Higgins) Subject: G++ from ftp.thp.koeln.de IS AT atari.archive To: Info-Atari16@naucse.cse.nau.edu I'm Sorry, I'll Read That Again ... that's ~ 2 fs (sigh) ------------------------------ Date: 7 Jun 91 17:44:39 GMT From: fs7.ece.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!mc4c+@sei.cmu.edu (Mark Choi) Subject: gcr To: Info-Atari16@naucse.cse.nau.edu I do not know what is up with Dave, but I got the installer to work just fine. System 7 wouldn't boot, of course:( -mark- ------------------------------ Date: 5 Jun 91 22:36:18 GMT From: mcsun!hp4nl!telmail!neabbs!marclaan@uunet.uu.net (MARC LAAN) Subject: gcr To: Info-Atari16@naucse.cse.nau.edu >can GCR run Sys 7 We didn't succeed in running Sys 7.0 on ST (1040 witch 2.5 meg Ram). Even in the most minimal configurations we got a 'not enough memory'-alert. We notified GBS by fax, but didn't get reponse yet. On our Mac Plus evrything runs fine. In both cases we used the golden master CD-ROM-version of System 7 (i.e. the US version) on our European systems. ------------------------------ Date: 7 Jun 91 15:48:55 GMT From: europa.asd.contel.com!wlbr!lonex.radc.af.mil!longj@uunet.uu.net (Jeffrey K. Long) Subject: Latest ver. of Prospero-C?? To: Info-Atari16@naucse.cse.nau.edu I have Prospero-C version 1.14. Is there a newer version?? Also, can someone comment on their Developer's tookkit for C? Is it worth the money? Do you get source code for the libs? Jeff -- ---------------------------------------------------------------------------- Capt Jeff Long Rome Laboratories, Griffiss AFB, NY longj@lonex.radc.af.mil (preferred) Network Design Laboratory jlong@cassiopeia.radc.af.mil (315)330-7751 or (DSN)587-7751 ------------------------------ Date: 6 Jun 91 11:12:52 GMT From: mcsun!hp4nl!alchemy!avgroeni@uunet.uu.net (Annius Groenink) Subject: LINE F To: Info-Atari16@naucse.cse.nau.edu Are there possibilities to change parts of the AES (for example to change the window manager- make windows faster, give them a nicer (X-like) look..)? How (uniformly) is AES programmed on STs/TTs? Are there (of course, undocumented)' fixed functions for the internal line F calls, and are they still used in the TT/ 68030-68882 ? (I guess this is all a large dream, for I've never seen any programs do this without replacing the ENTIRE AES, but if someone has any hints, I'd be most grateful to hear them.) -- ________________________________________________________ Annius Groenink|undergraduate student Laan van Borgele 24|maths/computer science at the 7415 DJ Deventer|University of Utrecht, Holland. ------------------------------ Date: 7 Jun 91 13:03:23 GMT From: comp.vuw.ac.nz!actrix!Roger.Sheppard@uunet.uu.net (Roger Sheppard) Subject: More than 4 Meg ?? To: Info-Atari16@naucse.cse.nau.edu In article <1991Jun7.004215.1721@ncsu.edu> twmanino@eos.ncsu.edu writes: > >>Nope. TOS 1.6 has a screwed up memory sizer that assumes that if two banks of > >>RAM exist then both banks are the same size. I don't know if this is a bug > >>in the true sense or malicious crippling but it is sad. > >> > >>BTW, a bank is two SIMMs since memory access is on a word basis. > >> > >> 512K = 2 x 256K SIMMs > >> 1Mb = 4 x 256K SIMMs > >> 2Mb = 2 x 1Mb SIMMs > >> 2.5Mb = 2 x 1Mb SIMMs + 2 x 256K SIMMs (Not with TOS 1.6) > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >I heard this works on TOS 1.6 if you put the 256k SIMMs as the first bank > >and the 1M SIMMs as the second bank. But I could be wrong. If you're > >having trouble, though, it's trivial to try it the other way. > >> 4Mb = 4 x 1Mb SIMMs > > There's a file at atari.archive that fixes the 2.5 meg problem... It's called > SIMMFIX. > > You put it in your auto folder. It reprograms the MMU, then does a warmstart. > > I get 2 bombs on the first boot attempt, but when the machine resets, it does > just fine. Any subsequent warmstarts just boot right up. > > Be sure to read the instructions.... > > > Hope this helps, > Tony > twmanino@eos.ncsu.edu Get Version 2 of simm fix, it states that the problem is with the OS and not the MMU, I have played with a STE with 2.5 megs and found no problems ?? and the MMU had the correct bits set in it.. -- *** Roger W. Sheppard * Roger.Sheppard@bbs.actrix.gen.nz *** *** 85 Donovan Rd * * At least I don't Flicker, not *** *** Kapiti New Zealand.. * like a dying light globe. ! *** ------------------------------ Date: 7 Jun 91 15:31:00 GMT From: mcsun!ukc!edcastle!john@uunet.uu.net (John Hannah) Subject: More than 4 Meg ?? To: Info-Atari16@naucse.cse.nau.edu In article <1991Jun5.222630.24777@jato.jpl.nasa.gov> vsnyder@jato.Jpl.Nasa.Gov (Van Snyder) writes: >> 2.5Mb = 2 x 1Mb SIMMs + 2 x 256K SIMMs (Not with TOS 1.6) > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >I heard this works on TOS 1.6 if you put the 256k SIMMs as the first bank >and the 1M SIMMs as the second bank. But I could be wrong. If you're >having trouble, though, it's trivial to try it the other way. >> 4Mb = 4 x 1Mb SIMMs I'm afraid it doesn't work the other way!! I have one of the dreaded STEs with soldered SIPS rather than SIMMS and when I added memory I tried to put 1Mb chips in the second bank with the 256K (soldered in) SIPS in the first. The machine only thought it had 1Mb!! I had to unsolder the first bank and put the 1Mb chips there (I added in-line sockets of course!). My system has 2.5Mb but TOS thinks it has 4Mb. It seems to cause few problems unless I try to use more than 2.5Mb!! I havn't tried the famed SIMMFIX yet. John Hannah Electrical Engineering, University of Edinburgh, UK ------------------------------ Date: 7 Jun 91 16:55:49 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!samsung!know!dae mon@arizona.edu Subject: NVDI To: Info-Atari16@naucse.cse.nau.edu Would someone please post info about where I can obtain NVDI, a German pgm to accelerate screen draws on a TT with a TTM195 monitor? Thanks. ------------------------------ Date: 7 Jun 91 15:06:10 GMT From: infonode!ingr!b11!jmack@uunet.uu.net (Cery McCormick) Subject: Reading 8-bit disks with an ST To: Info-Atari16@naucse.cse.nau.edu In article <6DB632w164w@cellar.UUCP>, revpk@cellar.UUCP (Brian 'Rev P-K' Siano) writes: > Can anyone either outline or recommend a way for me to work up a > quick transfer system? Is it possible to hitch an old 810 disk drive to an > ST, and read ASCII files from it> > > Advice-- and especially a solution-- would be greatly appreciated. > You can use Derek Mihocka's (sp?) X-Former software. It requires a special cable to go between the ST's printer port and the 8-bit drive, but you can then read the 8-bit files into your ST. ------------------------------ Date: 7 Jun 91 16:01:45 GMT From: unhd.unh.edu!oz!pyr579@uunet.uu.net (Technoid) Subject: Reading 8-bit disks with an ST To: Info-Atari16@naucse.cse.nau.edu In article <1991Jun7.121908.7292@mailer.cc.fsu.edu> boyd@nu.cs.fsu.edu writes: >In article <6DB632w164w@cellar.UUCP>, revpk@cellar.UUCP (Brian 'Rev P-K' Siano) writes: >> >> I've got several megs' worth of old and very important text files on >>floppy disks, leftovers from when I used an 8-bit Atari. Now that I have an >>ST, I'd really like to be able to bring the text into my new machine and >>transfer it to 720K floppies. >> >> Can anyone either outline or recommend a way for me to work up a >>quick transfer system? Is it possible to hitch an old 810 disk drive to an >>ST, and read ASCII files from it> >> >> Advice-- and especially a solution-- would be greatly appreciated. > >I cannot give you a solution, but I can tell you where one is. You need >to get STXformer (the 8-bit emulator), and make a cable. At that point, >you can hook an 810 to your ST and read disks. I don't know the details. > >Of course, if you have an 850 you could always direct-connect the two >together and modem them over . . . . > Hello, It should also be mentioned that there is a fully 8-bit emulator for the ST. You will find it and more information on the STXformer on Atari.archive I have yet to find an Xformer cable though so if you have any luck, please get back to me. Stephan -- \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ pyr579@oz.plymouth.edu Stephan R. Cleaves Salamanders Are Cool... /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ ------------------------------ Date: 7 Jun 91 16:18:02 GMT From: noao!ncar!elroy.jpl.nasa.gov!swrinde!zaphod.mps.ohio-state.edu!wuarchive!psuvax 1!psuvm!dearn!dmswwu1c!zvd007@arizona.edu (U.Kuehn) Subject: Requirements for g++ To: Info-Atari16@naucse.cse.nau.edu In article <104150.26002@timbuk.cray.com>, marc@sequoia.cray.com (Marc Bouron) says: >Simple question time: do I need gcc if I want to use g++? Having forked out e >th >dosh on Lattice C v5 (pretty goo, BTW) I'd rather not have to get another C >compiler :-) I have both, g++ and gcc, but I think you dont need the c compiler. You need as minimum: g++.ttp the compiler driver gcc-cc1p.ttp the c++ compiler gcc-cpp.ttp the preprocessor gcc-as.ttp the assembler, used to assemble the output of the compiler gcc-ld.ttp the linker and the libraries ( C and!! C++ ) and the header-files I hope this helps. U.Kuehn ------------------------------ Date: 7 Jun 91 19:30:39 GMT From: noao!asuvax!cs.utexas.edu!sdd.hp.com!caen!spool.mu.edu!cs.umn.edu!uc!shamash!ti mbuk!marc@arizona.edu (Marc Bouron) Subject: SED for ST? To: Info-Atari16@naucse.cse.nau.edu In article , jhenders@jonh.wimsey.bc.ca (John Henders) writes: > > Does anyone know if there is a sed clone for the ST? If so, where > can I find a copy? > > -- > John Henders jhenders@jonh.wimsey.bc.ca > MIND over MIDI Productions or ubc.cs!van-bc!jonh!jhenders > Vancouver,B.C > Take a look in utilities/sed.arc at atari.archive. [M][a][r][c] ################################################################################ # # marc@sequoia.cray.com # . . # # Marc CR Bouron # M.Bouron@cray.co.uk (ARPA) # _|\ /|_ # # Cray Research (UK) Ltd. # M.Bouron@crayuk.uucp (DOMAIN) # (_|_V_|_) # # +44 344 485971 x2208 # M.Bouron@uk.co.cray (JANET) # | | # # # ...!ukc!crayuk!M.Bouron (UUCP) # # ################################################################################ ------------------------------ Date: 7 Jun 91 18:16:18 GMT From: noao!asuvax!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc .edu!caen!math.lsa.umich.edu!math.lsa.umich.edu!brode@arizona.edu (Jon Brode) Subject: Umich atari To: Info-Atari16@naucse.cse.nau.edu In article <1991Jun07.123436.18023@actrix.gen.nz> Roger.Sheppard@actrix.gen.nz (Roger Sheppard) writes: >Is this not the server for people that don't have FTP access, also >refered to as BART.. We do both ftp and BART. (Brode's Archive Retrieval Thang) >how do we now access it when we don't have FTP access ?. Good question. Send a message to atari@atari.archive.umich.edu. The body of the message should read "help". BART will send you back a help file that explains everything. Send me a message if you have any questions. I may be a bit spotty on Atari software these days, but I believe that I am eminently qualified to answer BART questions. Jon Brode -- jon@atari.archive.umich.edu brode@math.lsa.umich.edu Supreme Allied Commander of the Umich Atari Posse ------------------------------ Date: 5 Jun 91 20:49 +0100 From: Robert Weissenfels Subject: Uniterm V2.0e 010, was: ST User Virus! To: Just to compete in the great Who's-got-the-newest, the subject says it all... By the way: This version of this great program is copyrighted 1986/1987/1988. Aren't there any newer releases? Is Simon Poole still alive? Who killed Simon P.??? Seriously: can anybody tell me where I can get a newer version/release and perhaps, a newer manual. My manual is only about 2.0c. Bye Robert +--+--+--+ | | | | | | +--+--+--+--+--+--+--+ weissenfels%bauelemente.e-technik. | | | | | | | | uni-dortmund.dbp.de --+- . __ ___ ___-+-- @relay.cs.net (CSNET, ARPANET) | | / /_ /__/ /_ | | @dfngate.bitnet (BITNET, EARN) +--+ /__ __/ /__/ /__ +--+ @unido.uucp (UUCP) | | __ __ . . __ | | +--+ /_/ /_ /|// /_ +--+ | | / / /_/ / / /_ | | The *A*C*I*D* House --+- -+-- | | | | | | | | +--+--+--+--+--+--+--+ if it's got any meaning, it's mine... |__|__|__|__|__| ------------------------------ Date: 7 Jun 91 09:50:02 GMT From: mcsun!unido!rwthinf!cip-s01!wolfram@uunet.uu.net (Wolfram Roesler) Subject: XTERM.COM, Communications software To: Info-Atari16@naucse.cse.nau.edu 6600hien@ucsbuxa.ucsb.edu (Hien Le) writes: >Hi! Does anyone know where I can get XTERM.COM You mean that great little X-Modem terminal prg for the portfolio? I GOT IT!!! It's on the portfolio in my pocket right beside me... If you are interested I'll send it to you in uuencoded form, it' just about 4 KB. Or is there any interest in a public posting? CU \/\/olfram ------------------------------ End of Info-Atari16 Digest ******************************